Support us on Patreon: https://www.patreon.com/woodshoplife
 
Sean
1) Hi all, greetings from Australia. Love the show and appreciate your willingness to share your knowledge with people like me who are just starting out. I have a question about router dust collection. I have recently built a router table and am looking at the dust collection. I have a router lift and round body router installed I am waiting for the port to come for the fence dust collection, but have a question for under table dust collection. What do you recommend here? I have seen something from milescraft called a dust router 1501 that  has a router fence and router dust collection. Currently the router is mounted on a router lift which technically will sit inside a space covered by a door. Any advice welcome - Jamie
2) I just bought a new house with some property and it has
A big detached 2 car garage that will be my new shop. I was planning to get a Laguna Fusion F2 to upgrade my dewalt jobsite tablesaw, but they are backordered until August. I can still find Sawstops in my area so it looks like I'll plop the extra money and save my life. At this point the 52 inch fence is only $100 more than the 36 inch
In your opinion is the 52 worth the money and extra space or is the 36 big enough, I mostly build custom furniture but will be doing all the cabinets in the new house remodel, bathrooms and kitchen as well as bed frames, a master closet, building etc. So a mix of sheet goods and hardwood builds.
I don't have a track saw, I use a circular saw with the bora NGX strait edge system to roughly break sheet goods now.
 
Thanks for the great show I learn so much.
 
Will @ Oleksy wood works
 
Guy
1)I have a question about Festool sanders.  I currently use a delwalt 5" random orbit sander that works well enough.  I have it hooked up to a shop vac that I run with a standard filter and a hepa filter at the same time.  This results in no dust coming out of the vacuum, and it gets most of the dust from sanding coming off the sander itself.  I still have to wipe down my work after sanding which I don't mind.
I recently built a desk and had to sand vertical surfaces for the first time and was surprised at how much harder this was and how numb my hand was afterwards.  It was pretty miserable.
I have the chance to upgrade to a Festool sander and I see several different used models for sale locally.  I was leaning towards the RO 125 because of its versatility but have read that it can be difficult to handle and can vibrate more in random orbit mode than the sanders specifically designed for random orbit sanding like the ETS.
Will one of the Festool sanders actually leave a better finish than my dewalt?  If so, is it better to go with the RO 125 because of its versatility or will a dedicated random orbit sander have less vibration?  Will I see a difference in finish between the RO 125 and an ETS 125?
I am somewhat new to woodworking but I am fortunate enough to have a well outfitted shop.  I have been working on smaller projects like boxes and shoe racks.  I'd like to get into building more desks, tables, cabinets, and doors.  I don't really strip or refinish furniture, so I may not have a need for the material removal capabilities of the RO 125? Thanks Julio
2)  Hello, I've been a fan of the podcast since the beginning and thought I'd finally submit a question. So, I plan to make one of those bath tub trays for my soon to be wife. It will be made with 1 inch thick purple heart wood with various little slots and grooves and routed out sections to place a wine glass, hold a phone or book, put a candle on that sort of thing. My question is what would the best finish be for something like this that is always going to be used on a bathtub and be exposed to water every time it's used even if it's only for short periods of time. I've basically only ever used typical stain and brush on poly/varnish for my projects, but wouldn't mind using a satin oil finish for the look. What do yo