Holiday Message

FromWoodshop Life Podcast

Start listening View podcast show

Holiday Message

FromWoodshop Life Podcast

ratings:

Length:

1 minute

Released:

Dec 1, 2023

Format:

Podcast episode

Description

Due to the Thanksgiving Holiday, we have taken a week off. Please feel free to listen to any other episode in our vast catalog!

Released:

Dec 1, 2023

Format:

Podcast episode

Titles in the series (94)

Bi-Weekly Podcast Focused on the Craft of Woodworking

Skip carousel

Episode 64 - Darn Dust Nibs!, Glue In Cold Conditions? , Guys Work Experience, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Hi, I just joined as a new patron and my name is Dale. I have been listening for a couple months and have tried spraying shellac on ambrosia maple. I sanded with 400 grit between each ... by Woodshop Life Podcast
51 min listen
Episode 75 – Marking Gauge, Straining Consistencies, Tight Blades, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1)It seems that no matter what I try its hard to make great mitre cuts. I have a sawstop with a Osborne mitre gauge, an older radial arm saw (70's craftsman) that I've tried the broken ... by Woodshop Life Podcast
69 min listen
Episode 57 - Router Sleds, Air Cleaners, Which Domino, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I am looking at getting a Festool domino machine. I was wondering which one you all use the most? They are a lot of money and I want to get both, but only one is in the budget currently. ... by Woodshop Life Podcast
58 min listen
Episode 52 – Holding Small Parts, Planer Sled Designs,Staining Plywood vs Solid Wood, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guys 1) I had a question for you about staining frame and panel doors. A few months back I made a few cabinets that I wanted to match reasonably well with existing kitchen cabinets (made from bi... by Woodshop Life Podcast
52 min listen
Episode 55 - Gloss before Satin?, Trusting Miter Saws, Table Saw Fence Decisions, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I've been building small furniture projects (Shaker tables, end tables, walnut table, lounge chairs) in my hobby shop using a skill saw or a hand saw when a bandsaw has been called for. M... by Woodshop Life Podcast
54 min listen
Episode 51 - Dust Collectors, When To Pull The Trigger, Breaking Bandsaw Blades, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1)When is the right time to pull the trigger? I'm currently using an old Grizzly 6" jointer that works fine but limits me in terms of both width and length of stock. What measurements or... by Woodshop Life Podcast
51 min listen
Episode 61 - Favorite Cherry Finish, MFT/3 Hype, Salt With Your Glue?, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I'm a part-time woodworker that does occasional commission work for a local distillery. Two weeks ago—after listening to several of your episodes discussing track saws and Guy's affinit... by Woodshop Life Podcast
47 min listen
Episode 60 - Your Own Designs, Link Drive Belt Hype!, Bed Construction, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) My question is: I am making a bed and I am contemplating the best way to attach the bed rails. I like the bed rail hangers/brackets because mortising and screwing them in should be simp... by Woodshop Life Podcast
60 min listen
Episode 58 - Choose Your Grain Wisely, Dowels?, Storing Sheet Goods, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) Hey guys! I know you all have CNC's in your shop. I am about to buy one and I have about $2500 to purchase one. I have thought about the shapeoko XXL or the shaper origin. I know you ha... by Woodshop Life Podcast
60 min listen
Episode 54 - Belt Sanders?,Outfitting A Shop, Storing Lumber In A Shed, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I’m writing about a project where we are making a table and using white oak for the first time. While most boards looked great throughout the milling process, we found that a few board ... by Woodshop Life Podcast
51 min listen
Episode 66 - Expense of Woodworking As a Hobby, Multiple Dust Collectors?, Wood Floor In The Garage, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Hey fellas. So I’m having some trouble getting nice glue lines when I’m edge jointing long boards (6’+). I’m building a table top (72”x36”) out of hard maple. How particular are each ... by Woodshop Life Podcast
53 min listen
Episode 87 - Critical Mistakes Were Made, Crappy Shellac Finish, Shop Lights Layout & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Recall an instance when you messed up at a critical step in a build. Then describe what you did to shake off the setback, and what if anything, you did to save the project? Michael 2) ... by Woodshop Life Podcast
58 min listen
Episode 68 – Radial Arm Saws?, Laminating Two Pieces, Best Size Bandsaw Blade, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) Hey guys! I love the pod cast, ya'll really do a great job. My question is about radial arm saws. I have recently started selling tables on the side to try and make some extra cash. Rig... by Woodshop Life Podcast
57 min listen
Episode 71 – Shellac Boogers, Festool TS 55 and MFT vs the Kreg Adaptive Cutting System, Table Construction, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Great show guys. Been listening a while and I've heard them all. Thanks for sharing your experience. Hoping you can give me some ideas for potential workaround. I recently made a miter... by Woodshop Life Podcast
54 min listen
Episode 74 – Chemical Tricks, Outdoor Lumber, Frame & Panel Glue-up, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Second question: This question is for Sean, mostly. I'm getting ready to make a blanket chest with frame-and-panel front, sides, and back, out of cherry and walnut, but the recipient w... by Woodshop Life Podcast
57 min listen
Episode 56 - Ripping Narrow Stock, Vacuum Hoses, Standard Board Width, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I've been woodworking nearly 4 years and do it as a part time business. This year, business has really taken off and I'm getting several large commissions. Because of this, I finally pull... by Woodshop Life Podcast
64 min listen
Episode 53 - Three-Phase, Kapex Ergonomics, Ash Hard Enough For Workbench?, and MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) Next question: how much time do you spend working on workflow and process in the shop? I’m a night and weekend woodworker who is taking commission orders now and want to ensure I maximize... by Woodshop Life Podcast
49 min listen
Episode 67 – Shellac Tips For Large Surfaces, Starting Clamp Collection, Break Down Workbench, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1)Hey fellas. 2 questions for you Purely hypothetical- you can only have 1: table saw or track saw. And why? When sanding back, how far is back? Are you aiming for a perfectly flat surf... by Woodshop Life Podcast
62 min listen
Episode 50 - Resaw Advice, Pricing Your Work, Waterfall Miter Reinforcement, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) What method do you guys use for waterfall joints (besides domino) and are biscuits and glue strong enough? Nick 2) I picked up 4 slabs of white oak that measure about 10 ft by 15” wide... by Woodshop Life Podcast
59 min listen
Episode 77 – The ULTIMATE Finish , Sled? What Sled!, MDF For Shop Furniture? & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1)Hi guys I'm in the market for a miter gauge for my table saw and really like the look of the Incra Miter 5000 but the cost over here in Australia is a bit on the high side ($700 plus po... by Woodshop Life Podcast
61 min listen
Episode 72 – Finishing A Desk, Dialing In Miters, Sanding Before Dovetails?, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Do you sand inside surfaces before or after gluing dovetailed parts together? Sanding before = potentially changing the fit and sanding after = having to sand inside corners. TheRoarin... by Woodshop Life Podcast
54 min listen
Episode 70 – 36" or 52" Table Saw?, Sander Vibration, Wax Removal, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Hi all, greetings from Australia. Love the show and appreciate your willingness to share your knowledge with people like me who are just starting out. I have a question about router du... by Woodshop Life Podcast
55 min listen
Episode 69 – Dream Bandsaw?, Three Phase, Tunes in The Shop, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Hey guys, I became a patron supporter a couple months ago and I really love the format of the podcast. I am a beginner woodworker who is in the process of acquiring more tools. I would... by Woodshop Life Podcast
63 min listen
Episode 65 - Routing Dados on Large Carcass Builds, Veneering Solid Stock, Edge Gluing Thin Stock, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) Hey guys - Ray here from Ravenwood. I love the podcast and the information it provides! I’m building a hand tool cabinet and had a quick question about storing hand planes in a plane t... by Woodshop Life Podcast
55 min listen
Episode 76 – Tracksaw Cutting Straight,Scraps? What SCRAPS! , Woodworking Tools Used for WHAT?, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Huy 1) When using a hold-down clamp to prevent wood movement -for example on the Incra 5000 crosscut sled, I find that often the wood moves veers slightly as I tighten the knob to hold the cl... by Woodshop Life Podcast
53 min listen
Episode 62 - Bowed Aprons, Cocobolo Blanks, How Did We All Meet?, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) Hey, Fellas! So in my last question, you recommended I keep an old but powerful Delta 15" planer. Good advice which I intend to follow. However, I'd like to ditch its steel mobile sta... by Woodshop Life Podcast
65 min listen
Cabinet Construction, Tablesaw Jigs, Keeping Your Fingers Attached and MORE!!: Guy's Questions: Good afternoon Gentlemen, Thank you for your podcast, I really appreciate it, and you fellows. Long story short, I am a re-engaging woodworker after taking a 20 year hiatus. Due to life requirements and work travel frequency, I was u... by Woodshop Life Podcast
61 min listen
Episode 83 - HVLP Sprayers, Squeeze Out In Corners, Warped Bench Top & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1) How do you guys remove remove squeeze out on inside corners? Let’s assume that you forgot to do any prep work for squeeze out. Is the only option short repetitive tedious strokes with ... by Woodshop Life Podcast
55 min listen
Eco-Friendly Woodworking, Grain Matching Logs, Jointing Thick Lumber Without Jointer & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife This episode is sponsored by: Shaper Tools, makers of Shaper Origin Sean 1) How often should I be cleaning my planer roller and do you know any plans to build a rolling lunchbox planer stand o... by Woodshop Life Podcast
60 min listen
Episode 78 – Robots In The Shop?, Getting Finger Joints Right, H2O Finish Warping Door Panels? & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Sean 1)Hi, I want to start using SketchUp and wondering if you guys had any tips on coming up to speed with the app? Did any of you take any training or know of some good video series? I'm fai... by Woodshop Life Podcast
62 min listen

More Episodes from Woodshop Life Podcast

Skip carousel

Related podcast episodes

Skip carousel

Discover this podcast and so much more

Holiday Message

Holiday Message

Description

Titles in the series (94)

More Episodes from Woodshop Life Podcast

Related podcast episodes