Support us on Patreon: https://www.patreon.com/woodshoplife
Guy
1) I've recently upgraded/downgraded from a Delta 3 phase 5hp unisaw right tilt (mucho power, not much safety) to a Sawstop 3hp left tilt (less power- more safety ). Is there any difference in approaching cuts for the left vs. right tilt? My crosscut sled has to be remade, I have to rework the mitre bar on my Delta (Buick sized) tenoning jig, etc. In the past, I've used the mitre bar on the left side for crosscutting -so the blade tilts away from the support fence. Do I start using it on the right side of the blade so it tilts away from the support fence? Eric
2) Since I'm planning to soon purchase some of these tools I would like your thoughts/recommendations for purchasing all Incra, all Woodpecker or a mix of both.  I would also like to know which five or six measuring devices you would recommend if it were for your own shop as I'm not exactly sure what I need.  I realize this may not be a fair ask given that Incra and/or Woodpecker are sponsors for some or all of you. Jack
 
Sean
1) I am gluing up 3 boards, each board being 1” thick x 8’long x 6” wide. I do not have a flat surface that big to do a glue up on. Do you have any recommendations on how to ensure a flat glue up? Nick
2) What’s the most useless thing you’ve bought for your shop? I’m not even going to try to explain this one. You know you bought something that you haven’t touched since you bought it. Guy.... you’re old... you know you have things you’ve bought for that one job and didn’t even use it then. What is it?  Brent Jarvis
 
Huy
1) For everyone: It seems that all three of you work in your garage. What are your best storage saving tips? Josh
2) Hi guys. I really appreciate everything you guys have put out. I’m a beginner to wood working. Been doing this about 4 years. I have a to. Of questions that I’d love to get your perspective on. I have a shop space that is 24 x 30. When I first started woods working I was out of a garage 1/4 of the size on was very intrigued by the Shopsmith. What are your thoughts on a 5 or 7 in one machine? I really enjoy the option for a lathe. And a quick flip to a drill press. - Kyle