QUICK PROJECT GUIDE
Hard labour 4/10 Skill level 4/10
Time needed 5 hours Do it yourself for ± R6 395: floorboards R3 190, laminated pine R1 680, planed pine R800, screws R60, sandpaper R20, curtain rod R225, cornice R200, acrylic sealant R30, leather belts R190
You will need
PROJECT NOTES
• Adjust the measurements and material quantities below for your own project.
• Measure and mark carefully and drill pilot holes where necessary.
SHOPPING LIST
• 18mm laminated pine, cut to: six 260 × 300mm pieces (crosses) two 260 × 120mm pieces (side• four lengths planed pine (32 × 95 × 3 000mm) • 22mm tongue-and-groove floorboards • 32mm wooden curtain rod, cut to: six 305mm pegs (for the shelves) seven 120mm pegs (for the hooks) • one tube acrylic sealant (Painters Mate) • cornice • 8mm steel pin, cut into seven 120mm pieces • 2 leather belts (30mm wide), cut into seven strips of 300mm each • one hundred 40mm oval nails • 1 packet 6mm × 40mm chipboard screws • 1 packet 8mm × 75mm hammer-in screws • 220-grit sandpaper
