World War 2 In Review No. 30: Grumman's Wildcat

By Merriam Press

Merriam Press World War 2 In Review Series. This issue of World War 2 In Review covers the Grumman F4F Wildcat with 383 B&W and color photographs and illustrations of its prototypes and variants, and the air forces that used this famous naval fighter. The Grumman F4F Wildcat was an American carrier-based fighter aircraft that began service with both the United States Navy and the British Royal Navy (as the Martlet) in 1940. First used in combat by the British in Europe, the Wildcat was the only effective fighter available to the United States Navy and Marine Corps in the Pacific Theater during the early part of World War II in 1941 and 1942.

• Language: English
• Publisher: Lulu.com
• Release date: Jan 3, 2018
• ISBN: 9781387487929

Book preview

World War 2 In Review No. 30: Grumman's Wildcat

World War 2 In Review No. 30: Grumman’s Wildcat

F:\Working Data\Merriam Press Logo CS.jpg

Hoosick Falls, New York

2017

First eBook Edition

Copyright © 2017 by Ray Merriam

Additional material copyright of named contributors.

All rights reserved.

No part of this book may be used or reproduced in any manner whatsoever without written permission, except in the case of brief quotations embodied in critical articles or reviews.

The views expressed are solely those of the author.

ISBN 9781387487929

This work was designed, produced, and published in the United States of America by the Merriam Press, 489 South Street, Hoosick Falls NY 12090.

Notice

The unauthorized reproduction or distribution of this copyrighted work is illegal. Criminal copyright infringement, including infringement without monetary gain, is investigated by the FBI and is punishable by up to five years in federal prison and a fine of $250,000.

Mission Statement

This series presents articles and pictorials on topics covering many aspects of World War 2. In addition to new articles and pictorials on topics not previously covered, future volumes may include additional material on the subjects covered in this volume. The volumes in this series will comprise a single source for innumerable articles and tens of thousands of images of interest to anyone interested in the history and study of World War 2. While no doubt some of these images and other materials could be found online, countless hours could be spent searching thousands of web sites to find at least some of this material.

The Images

These photos are seventy-plus years old, were taken under less than ideal conditions, and some were taken by individuals who were neither professional photographers nor using professional equipment. Thus the quality of the original image may be less than perfect. While Merriam Press tries to obtain the best quality images possible, the quality of the images in this publication will no doubt vary greatly.

This series of publications utilizes the editor’s collection of tens of thousands of photographs and other illustrative material acquired since 1968. Hundreds of sources over the years have been searched for material on every subject.

Photographs Needed

Merriam Press welcomes any contributions of photographs

of this or any subject for future volumes in this series.

How to Use This Publication

To get the best viewing experience, the use of the Adobe Digital program is highly recommended. This free program is available from Adobe.

This publication was designed to allow for larger images than most eReaders will accommodate. When the publication was created, the images were inserted in a fixed size (6.2 inches wide and up to 8 inches high), and cannot be resized in the program. The text, of course, can be enlarged and reduced as desired.

Viewing on a computer or other device with a large enough screen will allow viewing of the photos and other illustrations in their entirety. Viewing this publication on most eReaders will result in the images not being shown in their entirety.

To view the images properly, adjust the program’s viewing window’s right side edge accordingly. If the viewing window is too wide, images may overlap, and moving the right side edge will fix this.

•

Welcome to No. 30 of the World War 2 In Review Series

This issue of World War 2 In Review covers the Grumman F4F Wildcat

with 383 B&W and color photographs and illustrations.

Watch for future issues of this series with more articles on the history of World War II.

On the Cover

F:\Working Data\WW2 In Review\WR Published\WR - 030 - F4F - WORKING\WR030_LE1_files\image004.jpg

F4F-3A Wildcat, VF-121, 1940.

Grumman F4F Wildcat

The Grumman F4F Wildcat was an American carrier-based fighter aircraft that began service with both the United States Navy and the British Royal Navy (as the Martlet) in 1940. First used in combat by the British in Europe, the Wildcat was the only effective fighter available to the United States Navy and Marine Corps in the Pacific Theater during the early part of World War II in 1941 and 1942; the disappointing Brewster Buffalo was withdrawn in favor of the Wildcat and replaced as units became available. With a top speed of 318 mph (512 km/h), the Wildcat was still outperformed by the faster 331 mph (533 km/h), more maneuverable, and longer ranged Mitsubishi A6M Zero. But the F4F’s ruggedness, coupled with tactics such as the Thach Weave, resulted in an air combat kill-to-loss ratio of 5.9:1 in 1942 and 6.9:1 for the entire war.

Lessons learned from the Wildcat were later applied to the faster F6F Hellcat which, with the exception of range and maneuverability at low speed, the Hellcat could rely on superior power and high speed performance to outperform the Zero. The Wildcat continued to be built throughout the remainder of the war to serve on escort carriers, where larger and heavier fighters could not be used.

I would still assess the Wildcat as the outstanding naval fighter of the early years of World War II ... I can vouch as a matter of personal experience, this Grumman fighter was one of the finest shipboard aeroplanes ever created. —Eric M. Winkle Brown, British test pilot

Design and Development

Grumman fighter development began with the two-seat Grumman FF biplane. The FF was the first U.S. naval fighter with a retractable landing gear. The wheels retracted into the fuselage, leaving the tires visibly exposed, flush with sides of the fuselage. Two single-seat biplane designs followed, the F2F and F3F, which established the general fuselage outlines of what would become the F4F Wildcat. In 1935, while the F3F was still undergoing flight testing, Grumman started work on its next biplane fighter, the G-16. At the time, the U.S. Navy favored a monoplane design, the Brewster F2A-1, ordering production early in 1936. However, an order was also placed for Grumman’s G-16 (given the navy designation XF4F-1) as a backup in case the Brewster monoplane proved to be unsatisfactory.

It was clear to Grumman that the XF4F-1 would be inferior to the Brewster monoplane, so Grumman abandoned the XF4F-1, designing instead a new monoplane fighter, the XF4F-2. The XF4F-2 would retain the same, fuselage-mounted, hand-cranked main landing gear as the F3F, with its relatively narrow track. The unusual manually-retractable main landing gear design for all of Grumman’s U.S. Navy fighters up to and through the F4F, as well as for the amphibious Grumman J2F utility biplane, was originally created in the 1920s by Leroy Grumman for Grover Loening. Landing accidents caused by failure of the main gear to fully lock into place were distressingly common.

The overall performance of Grumman’s new monoplane was felt to be inferior to that of the Brewster Buffalo. The XF4F-2 was marginally faster, but the Buffalo was more maneuverable. It was judged superior and was chosen for production. After losing