SAIL

HITTING THE BAR

We hit the sandspit on our way out of the harbor at something over 5 knots and went hard aground. A moment before, the bottom had risen suddenly from 10ft to now visible sand in the wave troughs just ahead of us. The sandspit lay off the northeast corner of a small island at the entrance to the Minho River in Portugal. Modest Atlantic swells were working around the island and running into each other from opposing directions, creating 3ft breaking seas that were hitting our Malo 46, Nada at the bow and stern. It was too rough to launch the dinghy and set a kedge anchor.

I knew we had deeper water to port, so I put the helm hard over and throttled up to bring our head around, watching the engine gauges intently as sand began to plug the cooling system and the temperature crept inexorably upward. We were turning as each wave broke against , momentarily lifting us. We were clearly moving at least a little, plus we still had an hour or so of incoming tide with a favorable current coming across the sandspit, so I was reasonably confident that as long as the engine did not violently overheat we could eventually power off. As with all Malos, a is exceptionally strongly built, so I was not worried about the hull; however, I was not at all sure about the rudder— I could feel it

You’re reading a preview, subscribe to read more.

More from Sail

Sail2 min read
Racing News: Welcome to New York—We’ve Been Waiting For You
There aren’t too many events in the four-year IMOCA 60 calendar that bring the fleet to this side of the Atlantic. Fewer still see the world’s premiere offshore racing fleet in the continental U.S. This May, we have a rare opportunity to see them in
Sail2 min read
Sailing Scene
ARE YOU OUT THERE SAILING, CRUISING AND LIVING THE SAILING LIFE? Share your experiences with other readers. Send your photos to sailmail@sailmagazine.com And don’t forget to sign up for our free eNewsletter, Under Sail, at sailmagazine.com/newsletter
Sail7 min read
Jeanneau Yachts 55
Yacht design is an evolutionary process, built on the successes and failures of previous designs. Those that plied the trade before us provided guidance through formulas and reference charts, and these have held true as the fluids we design against h

Related