Episode 18 Router Bit Review Rail and Stile Stacked Bit

FromPodcast – Stu's Shed

Start listening View podcast show

Episode 18 Router Bit Review Rail and Stile Stacked Bit

FromPodcast – Stu's Shed

ratings:

Length:

20 minutes

Released:

Dec 19, 2007

Format:

Podcast episode

Description

Stacked Rail and Stile Router Bit. As discussed very recently on Stu’s Shed, this is a very impressive router bit, and has sold me on the concept of stacked rail and stile bits, rather than having two separate matched bits to perform the same job.

Released:

Dec 19, 2007

Format:

Podcast episode

Titles in the series (100)

Murdering electrons in the woodworking workshop.

Skip carousel

Episode 10 Triton Spindle Sander: Episode 10 Triton Spindle Sander Another horse out of the Triton Stables, the Spindle Sander is an excellent addition for the workshop. Taking spindle sizes from 13mm (1/2 inch) to 76mm (3 inch) all those difficult sanding projects can now be easily perfo by Podcast – Stu's Shed
20 min listen
Episode 04 Triton Router Plunge Spring: Episode 04 Triton Router Plunge Spring The Triton Router is an excellent machine, very powerful with lots of innovative features built-in. Table mounting is this router’s forte, and some features are built into this router to optimise using it in ta by Podcast – Stu's Shed
20 min listen
Episode 02 Bandsaw Blade Folding: Episode 02 Bandsaw Blade Folding When you purchase a bandsaw blade, it comes in a neat coil which takes up little space, and is easy to store. However, once the blade is used, getting it back to that initial condition can be quite daunting. Once you have by Podcast – Stu's Shed
20 min listen
Episode 23 Wixey Digital Planer Height Gauge: Episode 23 Wixey Digital Planer Height Gauge. Turning the planer/thicknesser into a precision tool.Available from Professional Woodworker Supplies.More detail in this blog entry Wixey Digital Planer Height Gauge. Update: Since making this video, Wixey hav by Podcast – Stu's Shed
20 min listen
Episode 08 Triton Wet and Dry Sharpener: Episode 08 Triton Wet and Dry Sharpener by Podcast – Stu's Shed
20 min listen
Episode 30 Pro Drill Press Table by Podcast – Stu's Shed
20 min listen
Episode 18 Router Bit Review Rail and Stile Stacked Bit: Stacked Rail and Stile Router Bit. As discussed very recently on Stu’s Shed, this is a very impressive router bit, and has sold me on the concept of stacked rail and stile bits, rather than having two separate matched bits to perform the same job. by Podcast – Stu's Shed
20 min listen
Episode 07 Triton 13in Planer Thicknesser: Episode 07 Triton 13in Planer / Thicknesser The Triton 13in Planer/Thicknesser is an interesting addition to the range of Triton power tools. It is a 2.5HP, 8000 RPM (16000 cuts/min) 330mm x 150mm (max size of stock) thicknesser. It has some quite unusual by Podcast – Stu's Shed
20 min listen
Episode 25 Sharpening Series Watercooled Grinding Stone: This episode looks at watercooled grinding stones, such as the Triton, Scheppach and Tormek. In this instance, a $A199 Triton Wetstone Sharpener is used to produce an edge on a plane blade of HSS. It also happens to be the last video shot in the old shed, by Podcast – Stu's Shed
20 min listen
Episode 03 Scrollsaw Dinosaur: Episode 03 Scrollsaw Dinosaur Scrollsaws are often used to produce very incricate pieces, but a cheap one is perfectly good for making some really cool kids’ toys. by Podcast – Stu's Shed
20 min listen
Episode 16 The Router Table: Episode 16 The Router Table. The router is an incredibly versatile tool, capable of many, many tasks. One method of using the router is to mount it underneath a table, so the router bit is exposed, and bringing the workpiece to the router, rather than the by Podcast – Stu's Shed
20 min listen
Episode 50a Preparing and Turning a Wooden Pen: Episode 50a Preparing and Turning a Wooden Pen. Part b will include finishing with a CA finish (Superglue), and assembly. by Podcast – Stu's Shed
20 min listen
Episode 19 Router Bit Review Raised Panel Bit: Raised Panel Bit. To complement the rail and stile bit featured last month, the raised panel bit is used to produce the panel that fits into the frame created by the rail and stile. The result is a very traditionally styled raised panel, used for cupboard by Podcast – Stu's Shed
20 min listen
Episode 06 Bandsaw Circle Cutting: Episode 06 Bandsaw Circle Cutting Bandsaws have always been great at cutting curves. With a simple jig, perfect circles are a breeze. This video demonstrates this homemade jig, and also briefly shows some minor mods that I have made to my 14″ Jet Ba by Podcast – Stu's Shed
20 min listen
Episode 09 Router Bit Review Compression Bit: Episode 09 Linbide TCT Compression Bit by Podcast – Stu's Shed
20 min listen
Episode 11 Router Bit Carbitool Wheel Cutter: Episode 11 Carbitool Wheel Cutter Carb-i-tool is a Melbourne manufacturing company, producing very high quality router bits in a myriad of styles and designs. One of their rather unique designs is the Wheel Cutter. It comes in 3 sizes – 40mm, 50mm a by Podcast – Stu's Shed
20 min listen
Episode 01 3D Router Carver: Episode 01 3D Router Carver The 3D Router Carver produces stylish designs using a handheld router, with dedicated templates and a uniquely designed router bit. by Podcast – Stu's Shed
20 min listen
Episode 36 Triton Bandsaws by Podcast – Stu's Shed
20 min listen
Episode 24 Tool Maintenance Cast Iron and Sanders: Episode 24 Tool Maintenance Cast Iron and Sanders For anyone not living in absolute ideal conditions, cast iron is not only magnetic, but “magnetically” attracts rust to it, and so it is important to both protect against rust, and be able to r by Podcast – Stu's Shed
20 min listen
Episode 14 E = mc Square: Episode 14 E=mc Square. Squares (or tri-squares) are an essential part of every toolbox. In this episode, we have a brief look at various types of squares, from the cheapest through to some superb versions that are available. We also look at how to test a by Podcast – Stu's Shed
20 min listen
Episode 48 Rejuvenating Machine Tops: Episode 48 Rejuvenating Machine Tops. Using TopSaver and SilverGlide to remove rust, lubricate and protect the top of a major shop machine. by Podcast – Stu's Shed
20 min listen
Episode 37 GMC 180mm Power Planer: Episode 37 GMC 180mm Power Planer Keep an eye out for the magic couch, and the blooper track at the end…. I had an operator problem (forgot to turn on the vac), and had to reshoot some of the video. I don’t get paid enough to worry about perf by Podcast – Stu's Shed
20 min listen
Episode 27 Noise in the Workshop: Noise in the Workshop. This is part of Safety Week 2008, and is a brief discussion about the noise produced by different machines in the workshop. by Podcast – Stu's Shed
20 min listen
Episode 12 Router Sign Writing: Episode 12 Sign Writing with the Router. It is one of those things that many people want to do when they first buy a set of template guides for their router, and see the picture of router-carved words on the box. Or when you come across a well-made wooden by Podcast – Stu's Shed
20 min listen
Episode 05 Wooden Thread Cutting: Wooden Thread Cutting Cutting a thread in metal is a relatively easy affair, especially with the thread-chasing tools available for lathes. How cool would it be, to be able to easily produce a wooden thread – imagine all the applications! Tools, hei by Podcast – Stu's Shed
20 min listen
Episode 26 Safety Week 2008 Introduction: Introduction to Safety Week on the Wood Whisperer Network 2008 A quick introduction and discussion about personal safety equipment, not only using it, but ensuring that the solution actually works for you so that you actually use the equipment when needed by Podcast – Stu's Shed
20 min listen
Episode 39 GMC Unlimited Rebate Planer by Podcast – Stu's Shed
20 min listen
Episode 43 Triton Steel Cutter: Episode 43 Triton Steel Cutter – Making a Noticeboard Although not currently available in Oz, these are still (afaik) available in the US etc, and they are still out there if you come across a used model. In any respect, for the project I was worki by Podcast – Stu's Shed
20 min listen
Episode 31 Tour of Dust Extraction by Podcast – Stu's Shed
20 min listen
Episode 17 Dressing Timber: Episode 17 Dressing Timber. In this episode, we are having a look at dressing timber so that it is flat/straight and square, ready for a project. In this case, we are using some reclaimed Jarrah from an old deck, but the principle is the same if you are p by Podcast – Stu's Shed
20 min listen

More Episodes from Podcast – Stu's Shed

Skip carousel

Episode 120 Making the TT Rex: Material: 3mm Acrylic Router Bit: Amana Tool 51441 – 1/16″ Spiral-o-Flute upcut from Toolstoday.com CNC Router: Torque CNC 9060 Spindle Speed: 12000RPM Horizontal Cutting Speed: 5mm/sec Vertical Cutting Speed: 10mm/sec with ramping Plans from by Podcast – Stu's Shed
20 min listen
Episode 119 Kerfing on the Tablesaw: I made this video while I was creating a vertical garden for an article in The Shed magazine. Lost the files for a while (and forgot I had shot the video!!), but here it is at long last! by Podcast – Stu's Shed
20 min listen
Episode 118 Lancaster cut video: A quick video of the Lancaster Bomber being cut out. I don’t want to think how long it took this video to actually get done – so many delays, so few windows of opportunity to work on it! I decided to cut my losses and just put together what by Podcast – Stu's Shed
20 min listen
Episode 117 Traditional Carriage Wheel Production by Podcast – Stu's Shed
20 min listen
SSYTC082 Australian Animals Series: (A slight delay in the SundayCNC post!) The Australian Animal series, from MakeCNC.com (scroll down a bit to the Australian Animals) A really nice set of designs, with some real standout patterns.  By far and away, the Sulphur Crested Cockatoo is the by Podcast – Stu's Shed
20 min listen
Episode 116 SawStop Wheel Kit by Podcast – Stu's Shed
20 min listen
Episode 115 Here be Dragons CNC: Design from MakeCNC.com by Podcast – Stu's Shed
20 min listen
Episode 114 CNC Master Collection by Podcast – Stu's Shed
20 min listen
Episode 113 Spoilboard by Podcast – Stu's Shed
20 min listen
Episode 112 Sabretooth: Plans from MakeCNC by Podcast – Stu's Shed
20 min listen
Episode 111 Nova Infinity Chuck and Jaw upgrade by Podcast – Stu's Shed
20 min listen
Killing a blade softly: As mentioned recently, I had an opportunity to demonstrate the SawStop Industrial (5HP) to a group from the Instrumentation & Technology Development Facility (Monash Instrumentation Facility), and the Faculty of Science, both from Monash University. T by Podcast – Stu's Shed
20 min listen
Episode 110 Multiple Layer Inlay Stencils: This episode uses one of the MLIS (Multiple Layer Inlay Stencils) from Tarter Woodworking. Good product, great results, and a very realistic price to boot. What’s not to love? The template used here is the Yin Yang. I did try the Clownfish, but ha by Podcast – Stu's Shed
20 min listen
Learning from mistakes: We all know the idiom about book-smarts versus street-smarts, and it holds just as true (if not more-so) for woodworking as any other pursuit. You can read and read about a topic, watch all the videos, follow the forums and talk with experts, but I can st by Podcast – Stu's Shed
20 min listen
SSYTC076 Ordering SawStop Online: Gave the I Wood Like website a run today, specifically around their new online shopping cart. Very seamless and easy way to purchase blades, brakes, inserts, even entire machines (both SawStop and MiniMax). The blade purchased will be the subject of an up by Podcast – Stu's Shed
20 min listen
SSYTC075 Timelapse 3D Print by Podcast – Stu's Shed
20 min listen
TWWWS Panorama 2 by Podcast – Stu's Shed
20 min listen
TWWWS Panorama 1 by Podcast – Stu's Shed
20 min listen
3D printer in action: First quick video of the printer working. Had a few teething problems, mainly around getting the print to adhere to the bed. Removed the aluminium bed and replaced with glass. A quick wipe of the surface with a glue stick, and we were away laughing! Print by Podcast – Stu's Shed
20 min listen
Episode 109 AmanaTool Raised Panel: AGE Raised Panel Set from ToolsToday.com by Podcast – Stu's Shed
20 min listen
Episode 108 DadoStop!: Had a look at the blade(s) after the fact, and found out where the significant cascading sound comes from when the brake activates. 12 separate tungsten carbide teeth ripped loose of the blade. Most presumably are due to the spacer blades not being in d by Podcast – Stu's Shed
20 min listen
SSYTC069 Dado FUBAR by Podcast – Stu's Shed
20 min listen
Episode 107 Miniature Copy Bit:   by Podcast – Stu's Shed
20 min listen
Episode 106 SawStop Guard by Podcast – Stu's Shed
20 min listen
Episode 105 Freeform Router Bowl: Using the Amana Tool bowl bits from Toolstoday.com, I create a freeform double (interlocking) bowl by Podcast – Stu's Shed
20 min listen
SSYTC067 PA Doors by Podcast – Stu's Shed
20 min listen
SSYTC066 Blade FUBAR: For those just interested in wanton destruction! by Podcast – Stu's Shed
20 min listen
Episode 104 Stop the Saw!:   by Podcast – Stu's Shed
20 min listen
Episode 103 Shed Tour: Finally! A tour of the shed, warts and all. It is still a work in progress, but I guess, it will always be somewhat of a work in progress! by Podcast – Stu's Shed
20 min listen
Episode 102 Centipede Sawhorse by Podcast – Stu's Shed
20 min listen

Discover this podcast and so much more

Episode 18 Router Bit Review Rail and Stile Stacked Bit

Episode 18 Router Bit Review Rail and Stile Stacked Bit

Description

Titles in the series (100)

More Episodes from Podcast – Stu's Shed