HI and Thanks for listening to episode 16 of the Welding Tips and Tricks Podcast!  We have had a very common theme with all the guests we've had on so far.  Everyone has all said paying attention to all the small details is one of their main reasons for being a successful weldor.  Rush Kane had said 95% is the prep and %5 is the welding.  When you see his work you know he can't be wrong.  We wanted to really dive into this theory and explain how we Sweat the Details on our jobs and with our welding.  This mindset can be very important and really step your game up to the next level in welding.  Sometimes it can be as simple as stepping back and thinking about what to do before doing it.  So download this episode, hit play, drop your hood, and Enjoy!       Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody   Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Show times and Notes   0:00-0:42            Introduction 0:42-1:54            What is Sweating the Details? 1:54-3:06            Details for Tig 3:06-6:58            Having your own setup 6:58-9:38            Wire brushes 9:38-10:35          Separated shop 10:35-12:45        Clean the edge 12:45-13:34        Do the steps needed 13:34-17:34        Do your job Right! 17:34-19:00        Chemical cleaning 19:00-22:17        Details for Aluminum  22:17-24:48        Cleaning your wire 24:48-26:48        What is Etching? 26:48-29:27        Ultrasonic cleaning 29:27-30:34        Exposer rates 30:34-36:02        Details with Mig and Mill Scale 36:02-37:01        3M Bristle Brush Wheel 37:01-38:44        Know the end results 38:44-40:26        What is DA Grinding? 40:26-41:18        Managers never understand 41:18-43:27        Time in a Can 43:27-46:13        Right wire size 46:13-47:01        Jonathan's details 47:01-55:42        Changing your liners and tips 55:42-56:34        Doing your own Liner Pull Test 56:34-59:02        Down and Dirty Tip 59:02-1:02:26     Clips the wire or not 1:02:26-1:03:32  Take care of the shop you're in 1:03:32-1:04:19  Watch the scratches  1:04:19-1:06:13  Welding on a Table! 1:06:13-1:09:30  Getting a good ground  1:09:30-1:10:41  Boat owners 1:10:41-1:11:55  Stick Details (ICWeld Tips) 1:11:55-1:17:29  Wrapping it up 1:17:29-1:18:30  Closing     Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Us?     You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/