Textured Wallpaper Treatment
Make over a wood nightstand with a roll of paintable anaglypta wallpaper and cool gray and white hues.
STEP 1 Remove hardware and lightly sand all wood surfaces. Use an air compressor or bristle brush to remove all surface dust, especially in corners.
STEP 2 Measure the areas where you will apply wallpaper and mark on the back of the paper. Cut pieces using a metal-edge ruler and sharp craft knife.
Working with one wallpaper piece at a time, apply a generous coat of spray adhesive to the back. Carefully place it on the nightstand, starting at the top edge. Press the paper outward, smoothing out any wrinkles or air pockets. As the adhesive dries, smooth any additional wrinkles. Once