Practical Boat Owner

The build: step by step

Before embarking on any project, it’s best to sit quietly with a cup of tea and mull it over. Well, I must have drunk gallons of tea before embarking on this particular project.

I eventually chose a design that would, as close as possible, fulfil my requirements and, importantly, be towable from my build site to the public highway.

Before committing to buy the full plans from François Vivier, I purchased the study plans for just a few pounds which enabled me to check the lines and fully understand the construction. I contacted the architect directly who proved to be very accommodating with my queries.

I then attempted to estimate the cost. This was informative but time-consuming due to my lack of knowledge of much of the terminology and where you could buy the materials and myriad of fixtures and fittings required. Needless to say, on completion of the build I’d underestimated the final cost.

To ascertain if I could tow the boat out to the road

You’re reading a preview, subscribe to read more.

More from Practical Boat Owner

Practical Boat Owner5 min read
Regional News
A boat owner who drove a rigid inflatable boat (RIB) around 18 knots – almost three times the speed limit – in Falmouth’s inner harbour on a busy summer’s day has been ordered to pay £3,061 in fines and costs by Magistrates in Truro, Cornwall. David
Practical Boat Owner1 min read
Replacing A Hatch Compression Seal
Window leaks usually develop because the window seals fail. The main causes for this are the deterioration of the seal due to ultraviolet radiation, weathering and flexing of the deck and superstructure. Quick fixes such as spreading silicone around
Practical Boat Owner1 min read
‘Always Have A Grab Bag’
1 Don’t anchor on dark nights in unfamiliar places until you have learned how to do it properly. Practice on calm days in good light until it becomes a slick operation that can be carried out efficiently and without too much effort. 2 When using a tr

Related