Tractor & Machinery

No.2 finished!

It has been a very long and arduous process to complete a tractor that started out as an expensive, hopeless wreck, but David Aylward and his team in Hampshire have triumphed! It all began in 2018 when Pam and Graham Towndrow took a call from Exmoor Farmers Livestock Auctions Ltd. regarding what turned out to be the second Nuffield tractor off the production line in December 1948.

They recognised the Nuffield M4, serial number NT502, as the most important tractor that any Nuffield fan could own and decided that, as they run The Nuffield and Leyland Tractor Club, it would be the ultimate machine to have on display wherever they go.

Unfortunately, others recognised its importance too and despite it being a wreck it was hotly contested at the auction. It finally saw the hammer fall at £5,800, which made it the most expensive Nuffield M4 ever sold, even before the restoration had started!

Even the original wheels were rusted out, but David Aylward managed to find a used set to enable it to be shown on the club’s stand at the Newark Vintage Tractor & Heritage Show in 2018, where it created great interest.

Graham asked David if he would restore the tractor for

You’re reading a preview, subscribe to read more.

More from Tractor & Machinery

Tractor & Machinery1 min read
McCartneys at W J Taylor & Sons
Saturday 23 March In Presteigne, Powys, McCartneys staged an auction for W J Taylor & Sons, due to retirement. The company was a former MF dealer, particularly prominent during the 100, 500, and 200 Series era, and had retained all information, recor
Tractor & Machinery6 min read
Finishing mower Overhaul
PART 5 In recent weeks I’ve been tying a few loose ends regarding the projects I’ve been busy with. Work on the finishing mower has now been completed and the machine is now ready to do battle this season. It arrived as a very neglected machine, not
Tractor & Machinery1 min read
Bargains Galore
Laser Tools has introduced a magnetic welding corner clamp designed for fixing ferrous components at a specific angle during welding. This clamp (part number 8751) features an easily readable gauge with a range of 20 to 200 degrees. Once the desired

Related