Rating
TOOLS FOR ALL 10 PROJECTS
Needle
Scissors or cutters
Thread
Bead stopper
Flat nose pliers
Glue
1. FLOATING BRACELET MATERIALS
Tigertail
Crimps
Clasp set
BEADS
Feature beads 4mm Swarovski beads
1. FLOATING BRACELET
STEP ONE
Cut the Tigertail to length, reducing the length by 1cm for the clasp set.
STEP TWO
Thread one feature bead and each side a Swarovski bead to the Tigertail centre. Add a crimp to each side.
STEP THREE
Use pliers to flatten each crimp closely to the beads.
STEP FOUR
Add another crimp to both sides and flatten each at the same distance about 3cm from the centre of the beads. Add beads as above, and secure with crimps. Repeat this step for all beads.
STEP FIVE
Add clasp set as shown in diagram. The clasp is relatively heavy, so it stays under your wrist.
2. FLOATING NECKLACE MATERIALS
Tigertail
Crimps
Clasp set
BEADS
Feature beads 4mm Swarovksi beads
2. FLOATING NECKLACE
STEP ONE
Cut necklace to shortest length you would wear it, reducing the length by 1cm for the clasp set. Thread one feature bead and each side a Swarovski bead to the Tigertail centre. Add a crimp to each side.