Everand Logo

Welcome to Everand!

  • Woodcraft Magazine

    News & Views

    Jul 09, 2018 3 minutes

    Use key stock to set up first cut with box joint jig

    I received the new issue today and read it cover to cover. I especially enjoyed the Essential Box Joint Jig article (June/July 2018, Issue #83, pp. 57-61) and have a suggestion for Ken Burton. He shows using a rule to set up the first cut (p. 59). It would be a lot easier and more accurate to use a piece of the same stock used for the indexing key to set the spacing for the

    You’re reading a preview, subscribe to read more.

    More from Woodcraft Magazine

    Woodcraft Magazine2 min read
    Tips & Tricks
    I find that the best method for repairing cracks and holes in projects is to use a paste made of sanding dust and glue (CA or epoxy) as a filler. The trick is in collecting enough fine dust from the species of wood that I need. My solution is to add
    Woodcraft Magazine5 min read
    Frame & Panel PLANTERS
    Over the years, longtime contributor Bill Sands designed and built many projects that have graced the pages of Woodcraft Magazine. Unfortunately, Bill passed away in April 2023, in the middle of building what would become his last project for us: the
    Woodcraft Magazine5 min read
    Upholstered CLUB CHAIR
    As much as I like all-wood chairs, when I want to relax after a long day in the shop, I look for something with a little padding. But as a woodworker, I still like to see some of the material I love. A bit of a conundrum, perhaps, but not an insurmou

    Related Books & Audiobooks