Everand Logo

Welcome to Everand!

  • Woodcraft Magazine

    Build A Beautiful 3-TOP BOX

    Jul 30, 2019 3 minutes
    By Matt Kenney
    Photos: Randy O’ Rourke
    Illustrations: Frank Rohrbach III

    Order of Work

    • Mill rabbets in sides and divider stock, then cut sides to finished length.• Mill stopped V-grooves in sides.• Miter the sides, then assemble.• Make the bottom panel.• Cut dividers to fit, then layout and rout through V-groove in long divider.• Prefinish dividers and inside faces of sides.• Glue bottom and dividers in place.• Make lids and handles.• Add paint accents to lids, then glue handles in place.• Apply finish to lids and box exterior.

    You’re reading a preview, subscribe to read more.

    More from Woodcraft Magazine

    Woodcraft Magazine2 min read
    Something Extra
    I enjoy living where I do in Eastern Pennsylvania where each season is distinct. The cold snows of winter slowly give way to warm spring afternoons. Then, the heat and humidity of summer are followed by the crisp, cool days of autumn. The change is r
    Woodcraft Magazine4 min read
    Simple DESK
    I needed a place to do deskwork without taking my laptop and setting up camp on the kitchen table. I wanted something attractive and sturdy that was also relatively lightweight, knock down, and easy to repurpose as needed. After noodling about with t
    Woodcraft Magazine3 min read
    Hard Wax Oil Finishes
    In recent years, hard wax oil finishes have roared onto the finishing scene, and for good reasons. They are dead-simple to apply and deliver excellent results, while containing low or no VOCS (Volatile Organic Compounds—potentially harmful solvents).

    Related