Everand Logo

Welcome to Everand!

  • Dirt Action

    TIPS TO APPLY YOUR MOTOCROSS GRAPHICS

    Oct 02, 2019 2 minutes
    Story and Photography Matt Bernard

    WHAT YOU NEED

    » Rag

    » Isopropyl alcohol or similar cleaner

    » Knife

    » Squeegee

    » Water bottle for wet method

    » Heat gun

    » Clean environment

    » Patience

    CLEAN THE PLASTICS

    Preparation is key when applying graphics. Used plastics must be free from all glue, residue and dirt. We are lucky to be starting here with brand-new plastics, which makes

    You’re reading a preview, subscribe to read more.

    More from Dirt Action

    Dirt Action1 min read
    Dirt Action
    EDITOR Grant O'Brien DESIGNER Kate Atkinson REGULAR CONTRIBUTORS Scott Bishop, Shane Booth, Todd Reed, Grant Reynolds, Damien Adams, Jemma Wilson, Lachlan Stanford, Joe Sheppard, Guy Streeter, Miles Davis ADVERTISING ENQUIRIES Mitch Newell 0402 202 8
    Dirt Action3 min read
    Hydration Station
    Think of your bike and its radiators. They are there to keep the engine temperature down and prevent fatigue on parts. If you were to run your bike on low or, even worse, no water in the radiators, the thing would be cooked in no time and you would b
    Dirt Action4 min read
    Inspired By Moto
    I relocated to Australia from Canada when I was just 16 years old. Back in Canada, I had a completely different life surrounded by horses. Born and raised just outside Calgary, my family was deeply involved in show jumping horses for many years. I st

    Related