Discover this podcast and so much more

Podcasts are free to enjoy without a subscription. We also offer ebooks, audiobooks, and so much more for just $11.99/month.

Horizontal Scroll Compressors w/ Trevor

Horizontal Scroll Compressors w/ Trevor

FromHVAC School - For Techs, By Techs


Horizontal Scroll Compressors w/ Trevor

FromHVAC School - For Techs, By Techs

ratings:
Length:
42 minutes
Released:
Aug 26, 2021
Format:
Podcast episode

Description

In today’s podcast, Trevor Matthews from Emerson talks about horizontal scroll compressors. Throughout the podcast, we refer to Bulletin AE4-1338 (R3). You can find that bulletin HERE.   Horizontal scroll compressors are common in mobile applications, like buses and trains. They’re shorter in height than other compressors, so they fit into tighter spaces and are ideal for transport refrigeration.   Scroll compressors are particularly susceptible to overheating, and you need some controls to protect your compressor from damage. To prevent overheating, scroll compressors require pressure relief controls. You can typically use an OEM high-pressure control to protect the system. A low-pressure cutout installed in the suction line can help prevent TXV failure and a wide range of restrictions.   Accumulators are especially important for horizontal scrolls in heat-pump applications. However, accumulators have a fine mesh screen that can become clogged easily. So, we highly recommend replacing your accumulator in the case of burnout, not reusing it.    Refrigerant migration prevention is a little more complicated than in refrigeration systems with other compressors. You can use a crankcase heater, but you may also need a check valve in the discharge line and a liquid line solenoid valve. We don’t use pump down cycles for refrigerant migration; we use them to prevent the gas from moving backward and reversing the scroll.   When commissioning a three-phase compressor, you need to put your gauges on before starting the system up. You may also consider using a phase rotation monitor to make sure the scroll compressor is rotating in the correct direction (usually clockwise but not always).   Trevor and Bryan also discuss:   Variable-speed horizontal scrolls (ZRH vs. ZBH models) Superheat requirements Floodback and slugging Starting and running Extreme discharge line temperatures Arcing fusite under vacuum Functional checks Pressure drop in the suction line Operation envelopes Pressure control set points   Check out climate.emerson.com for more information.   If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.   Check out our handy calculators HERE.   Check out information on the 2022 HVACR Training Symposium at https://hvacrschool.com/symposium/.
Released:
Aug 26, 2021
Format:
Podcast episode

Titles in the series (100)

HVAC School is the ever growing online source for real training topics for technicians in the Air-conditioning, Heating and Ventilation Fields. In the podcast, we will share recorded training, tech ride alongs, share challenging diagnostic scenarios. All to help make the industry, your company, and your truck a better place to be.