RWW 187 Which Saw First

FromThe Renaissance Woodworker

Start listening View podcast show

RWW 187 Which Saw First

FromThe Renaissance Woodworker

ratings:

Length:

22 minutes

Released:

Nov 26, 2014

Format:

Podcast episode

Description

The question of which saw to get first comes up a lot and while a strong case can be made for many different saws, I firmly believe the carcass saw should be the first saw you get.

Released:

Nov 26, 2014

Format:

Podcast episode

Titles in the series (85)

So many projects...so little time, welcome to woodworking A-D-D. I'm a woodworker who builds furniture using only hand tools. Come along and learn about the arts and mysteries of hand tool woodworking

Skip carousel

RWW 159 The Mobile Workbench: A toolbox that doubles as a workbench by The Renaissance Woodworker
10 min listen
Episode 1: Essential Turning Tools by The Renaissance Woodworker
13 min listen
RWW 142 Pocket Hole Bit: Here is a look at a vintage pocket hole bit from the 18th century. In reality this is a gimlet bit with a built in counterbore, but the ability to use the bit at almost any angle means we can created low angle pocket holes to join a table top to... by The Renaissance Woodworker
6 min listen
20th Century Furniture: Oscar Fitzgerald at WIA Design 2009 by The Renaissance Woodworker
14 min listen
RWW 141 Neander Apprentice: The bandsaw is often called the neanderthals apprentice. It is a great tool to have around even when you do all the rest of your woodworking using only hand tools. by The Renaissance Woodworker
8 min listen
Episode 4 Setting Up a Hand Tool Shop by The Renaissance Woodworker
32 min listen
RWW 158 Planing in the Dark: Using Low Light to Your Advantage by The Renaissance Woodworker
7 min listen
RWW 137 The Invisible Vise: Planing really thin pieces on the workbench by The Renaissance Woodworker
8 min listen
Episode 59 Composing with Wood Grain: Brian Boggs at Woodworking in America 2009 by The Renaissance Woodworker
15 min listen
RWW 143 A Blacksmith Visit for Frame Saw Parts: This time I'm visiting a blacksmith friend who is making some cool hardware for my upcoming frame saw build. I take a quick look around his shop and watch as he makes some of the saw parts. Thanks to Vince of Artisan Iron Designs for this... by The Renaissance Woodworker
10 min listen
RWW 138 Tuning a Long Bevel: Using a Block plane to match a 36" long bevel by The Renaissance Woodworker
8 min listen
Chips 'n Tips 2: Feel the Grain: Reading the wood grain by The Renaissance Woodworker
3 min listen
RWW 136 Scrap Practice: Sawing Practice by The Renaissance Woodworker
22 min listen
Episode 2 Turning Tool Handling by The Renaissance Woodworker
21 min listen
RWW 168 Tool Tote: The Iconic Woodwright's Shop Tool Tote by The Renaissance Woodworker
12 min listen
RWW 139 Hand Cranked Grinding: How I use a hand cranked grinder by The Renaissance Woodworker
23 min listen
Episode 3 Turning Tool Exercises by The Renaissance Woodworker
26 min listen
RWW 154 Review on the Veritas Saw Filing Guide: Sharpening a Crosscut saw by The Renaissance Woodworker
29 min listen
RWW 157 Safety Day 2013: Don't be a lazy shop dog by The Renaissance Woodworker
23 min listen
RWW 149 Demystifying the Lumber Yard: Get Woodworking Week 2013 by The Renaissance Woodworker
22 min listen
RWW 166 Tenon Layout Shortcuts: Relative Lay Out Tips for Hand Work by The Renaissance Woodworker
9 min listen
RWW 169 Joiners Saddles: Making Easy Workholding Devices by The Renaissance Woodworker
10 min listen
RWW 163 Bodger Lathe Part 2: Finishing up the Bungee Lathe by The Renaissance Woodworker
5 min listen
RWW 156 Fixing Dovetail Gaps: The Secret to Pretty Dovetails by The Renaissance Woodworker
12 min listen
RWW 160 My Sharpening Technique: How I sharpen my plane blades and chisels by The Renaissance Woodworker
5 min listen
RWW 145 Candle Lit Woodworking: Adding Light to the Workshop without Power by The Renaissance Woodworker
17 min listen
RWW 152 The Post Drill: Installing a 19th Century Post Drill in the Wood Shop by The Renaissance Woodworker
21 min listen
RWW 170 Center Bits: 18th Century Wonder Drill Bits by The Renaissance Woodworker
23 min listen
RWW 144 No Workbench Needed: How to Woodwork Without a Workbench by The Renaissance Woodworker
20 min listen
RWW 146 Ovolo Moulding by Hand: Using Hollows and Rounds to Make Mouldings by The Renaissance Woodworker
4 min listen

More Episodes from The Renaissance Woodworker

Skip carousel

Episode 203 Panel Clamps: Lee Valley and Homemade Hardware by The Renaissance Woodworker
17 min listen
RWW 202 Artisanal Flyswatter: Overbuilding and Overdecorating with Maple & Walnut by The Renaissance Woodworker
6 min listen
Shop Update 9/2/16: New School Site, Sapele Inlay Panel, Jack Rabbet Plane, WIA classes by The Renaissance Woodworker
9 min listen
RWW 201 Barron Dovetail Guides: A tool review by The Renaissance Woodworker
24 min listen
RWW 200 The Campaign Stool: Turning on a Spring Pole Lathe by The Renaissance Woodworker
6 min listen
RWW 199 Pencil Boxes: Building Cherry, sliding lid pencil boxes by The Renaissance Woodworker
29 min listen
RWW 198 Woodworkers Fighting Cancer Table and Chairs: A Build for Cancer Charity by The Renaissance Woodworker
24 min listen
Chips 'n Tips 13 Refining Odd Angles: Making a custom angle shooting board by The Renaissance Woodworker
5 min listen
RWW 197 Picnic Style Dining Table Part 5: Drawboring, Preparing for Finish, and Applying the Finish by The Renaissance Woodworker
13 min listen
RWW 196 The Peach Crate: A fancy schmancy produce crate by The Renaissance Woodworker
13 min listen
RWW 195 Display Shelf Part 3: HVLP finish by The Renaissance Woodworker
7 min listen
Chips 'n Tips 12 Smooth Planing 101: Smooth plane tips by The Renaissance Woodworker
8 min listen
RWW 194 Display Shelf Part 2: Match Planing Shelf Panels by The Renaissance Woodworker
26 min listen
RWW 193 Display Shelf Part 1: Legs and joinery by The Renaissance Woodworker
23 min listen
Chips 'n Tips 11: Mortising on Center by The Renaissance Woodworker
4 min listen
Chips 'n Tips 10: Using a Windlass to Clamp a Large Assembly by The Renaissance Woodworker
3 min listen
RWW 192 Bent Lamination Clocks: Introduction to Bent Lamination by The Renaissance Woodworker
35 min listen
Chips 'n Tips 9: Choosing Grain by The Renaissance Woodworker
3 min listen
Chips 'n Tips #8: Block Plane Round Overs by The Renaissance Woodworker
2 min listen
RWW 191 One Step to Better Sawing: Its all about the stance by The Renaissance Woodworker
11 min listen
Chips 'n Tips 7: Shaving Tight Joinery by The Renaissance Woodworker
3 min listen
RWW 190 The Joinery Bench: A Workbench for Precise work by The Renaissance Woodworker
23 min listen
Chips 'n Tips 6 Chamfer Your Way Parallel: China Marks are Just for Teacups by The Renaissance Woodworker
3 min listen
RWW 189 Bandsaw Reindeer without the Bandsaw: Merry Christmas! by The Renaissance Woodworker
17 min listen
RWW 188 Barnes 3 Lathe: Restoring and First Turning by The Renaissance Woodworker
13 min listen
Chips 'n Tips 5 Gimmie a Gimlet: Discover how useful Gimlets can be by The Renaissance Woodworker
3 min listen
Chips 'n Tips 4: Ripping Marks: Adding Accuracy to Long Rip Cuts while you rest by The Renaissance Woodworker
5 min listen
RWW 186 Picnic Style Dining Table Part 4: Adding Breadboard Ends by The Renaissance Woodworker
8 min listen
RWW 185 Picnic Style Dining Table Part 3: Making Tusk Tenon Joinery for the Trestle Base by The Renaissance Woodworker
10 min listen
RWW 184 Picnic Style Dining Table Part 2: Leg Joinery by The Renaissance Woodworker
14 min listen

Discover this podcast and so much more

RWW 187 Which Saw First

RWW 187 Which Saw First

Description

Titles in the series (85)

More Episodes from The Renaissance Woodworker