Measuring Voltage Drop w/ Jim Bergmann

FromHVAC School - For Techs, By Techs

Start listening View podcast show

Measuring Voltage Drop w/ Jim Bergmann

FromHVAC School - For Techs, By Techs

ratings:

Length:

38 minutes

Released:

May 1, 2017

Format:

Podcast episode

Description

In this episode of The Hvac School Podcast Jim Bergmann and Bryan talk about measuring Voltage drop and how it can prevent "bandaid" repairs.

Released:

May 1, 2017

Format:

Podcast episode

Titles in the series (100)

HVAC School is the ever growing online source for real training topics for technicians in the Air-conditioning, Heating and Ventilation Fields. In the podcast, we will share recorded training, tech ride alongs, share challenging diagnostic scenarios. All to help make the industry, your company, and your truck a better place to be.

Skip carousel

The Basics of Moving Heat: This episode is to help those techs new to the trade who never had a good grasp on thermodynamics as well as more seasoned techs who want a quick refresher. by HVAC School - For Techs, By Techs
44 min listen
Basic electrical Theory: In this episode of HVAC School, we talk BASIC electrical theory. Ohm's law, Watt's law, inductive vs. resistive loads, inductive reactance, loads, switches and circuits and more... by HVAC School - For Techs, By Techs
62 min listen
New Series Pilot - HVAC Tech Ride Along W/ Justin Skinner: In this first episode of a new series Justin talks about the calls he is doing before and after he does them, giving us a look inside the van of a senior HVAC tech. by HVAC School - For Techs, By Techs
1 min listen
Heat Pumps, reversing Valves and Defrost: In this episode Bryan talks about heat pumps, reversing valves, defrost, common issues, checking charge in heat mode and diagnosing the dreaded bypassing reversing valve. by HVAC School - For Techs, By Techs
61 min listen
Recovery, Evacuation and Dehydration Facts: In this episode we talk the ins and outs of recovery evacuation and dehydration best practices by HVAC School - For Techs, By Techs
35 min listen
There is More to Check: In this episode of HVAC school we cover some things you need to be checking on every service call. Air Filters Coils Corrosion Drains Electrical Connections Rubouts System Setup Operation Modes Find out more at hvacrschool.com by HVAC School - For Techs, By Techs
32 min listen
Why a TXV instead of a TEV?.. or a CSV?: Bryan talks to Leslie about the mysterious and magical TXV valve.. What it is, what is does and why they get misdiagnosed so often. Thanks to Daniel Anderson for making this his first episode suggestion. by HVAC School - For Techs, By Techs
45 min listen
Some Refrigeration Thoughts for A/C Techs: In this episode I talk to Jeremy Smith and he shares some of his refrigeration experience... and his Barry White smooth voice. Also - got to hvacrschool.com/10K to participate in Stephen Rardon's awesome tool giveaway. by HVAC School - For Techs, By Techs
28 min listen
Solder Rings, Thermal Imaging and My Grouchy Brother: This episode of HVAC School is a conversation on the merits and faults of embracing new products. We talk about Brazing with Solder Rings, Thermal Imaging, Micron Gauges, Flowing Nitrogen and why you shouldn't hire techs named Todd. by HVAC School - For Techs, By Techs
44 min listen
The Basic Refrigeration Circuit: In this episode of the HVAC School Podcast we talk about the basic refrigerant circuit, the compressor, Condenser, metering device, evaporator and lines. by HVAC School - For Techs, By Techs
75 min listen
Some High Voltage Electrical Basics: In this episode we talk through some electrical basics. Including potential difference, motor leads, capacitor basics and much more. by HVAC School - For Techs, By Techs
66 min listen
Combustion Analysis w/ Stephen Rardon: In this episode Bryan speaks with Stephen Rardon about gas and combustion analysis. For 6% off of tools go to HVACRschool.com/trutech offer code = getschooled Big thanks to Carrier & Carrier Enterprise for their... by HVAC School - For Techs, By Techs
33 min listen
Prepping Non-techs for Winter: In Florida we have a lot of heat pumps and pool heaters. In this episode I talk to my staff about some things they will want to know before it gets cold. by HVAC School - For Techs, By Techs
39 min listen
Gas Furnace Sequence of Operation w/ Justin Skinner: Bryan talks to Justin Skinner from Virginia and they talk about furnace sequence of operation and diagnosis tips. by HVAC School - For Techs, By Techs
44 min listen
Flow Nitrogen Great Again: I talk to Tim Bagnall from Arizona in this episode and we discuss flowing nitrogen and the differences between Florida and Arizona. by HVAC School - For Techs, By Techs
21 min listen
The 5 Readings Every Tech Must Know Well: Before you call your manager or a senior tech, make sure you have these 5 readings down pat. Suction Pressure, Liquid / Head pressure, Superheat, Subcool, Air temp Split. by HVAC School - For Techs, By Techs
46 min listen
High Efficiency Furnace Basics & Maintenance: Bryan talks to Ben from Canada about gas furnace basics as well as high-efficiency furnace basics and maintenance. by HVAC School - For Techs, By Techs
43 min listen
Circuit Board Diagnosis Basics: In this unedited episode of HVAC School Bryan and Nathan talks about some basic rules for circuit board diagnosis including - - Isolation Diagnosis - Open Circuits - Short Circuits and many other best practices. by HVAC School - For Techs, By Techs
31 min listen
Building a Great HVAC Business w/ Bob Gee: This episode is a rare look at business, sales and people skills instead of tech skills. This is an interview I did with Bob Gee several years ago. by HVAC School - For Techs, By Techs
34 min listen
Leak Detection Mindset: In this episode Bryan and Bert talk about properly stripping cables and leak detection best practices including. - Using your senses for leak detection - Electronic Leak Detection - Pinpointing Leaks by HVAC School - For Techs, By Techs
56 min listen
Diagnosis, Reconfirmation, Parts Changers and You: This Episode of HVAC School is a meeting I had highlighting a mistake we made in our business and going over how to be both a good and profitable technician even in the slow season. by HVAC School - For Techs, By Techs
32 min listen
Replacing a Compressor from Start to Finish: In this episode we go through the important steps to properly diagnose and replace hermetic compressors. we even tackle some controversial issues like meggohmeters and acid inhibitors. by HVAC School - For Techs, By Techs
53 min listen
Air Flow - Latent, Sensible, WB, DB, RH and Static: In this episode Bryan talks a bit about the air side of the system including latent and sensible, Relative Humidity, Wet Bulb, Dry Bulb and static pressure by HVAC School - For Techs, By Techs
47 min listen
Cutting Compressors, iManifold and Thermal Imaging w/ Ulises Palacios: In this episode I get Ulises Palacios on the phone and we talk about some of the things he has been up to. Specifically the iManifold / Bluvac integration, cutting compressors open and thermal imaging. by HVAC School - For Techs, By Techs
22 min listen
Hard Start Kits, Staybrite #8, Motor Ratings, AHR and Much More: In this episode of the HVAC School Podcast we talk about - - Carrier's bypass economizer - Hard Start Kits - StayBrite #8 - Discharge Line Temperature - Coremax Valve Cores - Notched Belts - Motor Temperature ratings and much more...... by HVAC School - For Techs, By Techs
39 min listen
Chiller Talk for the Chillerphobic: In this episode we talk with Jeff Nieman about- - Fan Coils - Chiller Water -Centrifugal Chillers - Screw Chillers and So much more.. Also, Bert and the Testo 770-3 make an appearance by HVAC School - For Techs, By Techs
50 min listen
HVAC Ridealong - Leak Detection, Repair & New Smart Probes: In this episode Justin talks about his first A/C repair of the season, his old combustion analyser and why he is enjoying the Testo Smart Probes his just got by HVAC School - For Techs, By Techs
25 min listen
Bonus - How Sibling Rivalry Built an Empire: A quick story about how two brothers fueled and industry and an empire with raw sibling rivalry. by HVAC School - For Techs, By Techs
13 min listen
Techs vs. Engineers w/ Bill Spohn from TruTech: In this episode Bryan talks with Bill Spohn from TruTech about the TruTech story, some practical airflow measurement advice and tech vs. engineer mindset when it comes to training and testing. Participate in the 10 year anniversary giveaway and... by HVAC School - For Techs, By Techs
28 min listen
Should I Start My Own Business? w/ Tersh Blissette: In This Episode Bryan Speaks with Tersh Blissett about starting a business and some important tips for operating a successful contracting business. by HVAC School - For Techs, By Techs
48 min listen

More Episodes from HVAC School - For Techs, By Techs

Skip carousel

Q&A - Starting an Internal Training Program - Short #195: In this short Q&A episode, Bryan answers podcast listener Cooper's question about starting an internal training program. Eugene Silberstein has been on the podcast before to offer his perspective on this topic, which you can listen to . ... by HVAC School - For Techs, By Techs
10 min listen
Bryan Orr - Humility in Thought Leadership: This podcast episode is Bryan Orr's presentation at the 6th Annual HVACR Training Symposium: "Humility in Thought Leadership." Bryan reflects on his own journey as a trades educator, business owner, husband, and father, sharing personal anecdotes and... by HVAC School - For Techs, By Techs
58 min listen
Q&A - Tech to Service Manager Tips - Short #194: This short podcast is a Q&A based on a question submitted to us by Andy Holt. Bryan gives some tips on how to go from service tech to service manager. Service managers may have better pay, but they also have different sources of stress than... by HVAC School - For Techs, By Techs
13 min listen
LIVE From the ACCA Conference 2024: This episode was recorded live on location at the 2024 ACCA conference in Orlando. Bryan starts by interviewing Marissa, a co-founder of Conduit Tech, a software company providing load calculation and sales tools for HVAC contractors. Marissa shares... by HVAC School - For Techs, By Techs
29 min listen
Positive Productive Client Communication: In this insightful podcast episode, the host delves into the crucial aspects of positive and productive client communication, drawing from his extensive experience in the residential air conditioning industry. He emphasizes the importance of setting... by HVAC School - For Techs, By Techs
34 min listen
Condensate Drains Install & Service: Roman Baugh, Matthew Condron, and Luke Peterson discuss the importance of proper condensate drain installation and maintenance, particularly in commercial applications. The conversation begins with the hosts examining the typical drain configurations... by HVAC School - For Techs, By Techs
61 min listen
EEV Types - Short #193: In this short podcast episode, Bryan explains electronic expansion valve (EEV) types. EEVs perform the same function as TXVs, but they operate electronically, not mechanically. The EEV makes sure that the evaporator is full of the right amount of... by HVAC School - For Techs, By Techs
8 min listen
Heat Pump COP and Low Temp Lock Out: This episode of the HVAC School Live Stream covers the key concepts around heat pump efficiency and understanding the coefficient of performance (COP). Eric Kaiser from TruTech Tools and Jim Fultz from White-Rodgers provide valuable insights into how... by HVAC School - For Techs, By Techs
56 min listen
Motor Protection Types - Short #192: In this short podcast episode, Bryan talks about motor protection types, including overloads. The most common overload we see in residential HVAC is a built-in thermal overload, which is usually a bimetallic disk that flexes in response to heat (such... by HVAC School - For Techs, By Techs
10 min listen
Expansion Valves - What Does and Doesn't Matter?: This podcast features a lively discussion on expansion valves, particularly thermostatic expansion valves (TXVs or TEVs), with a panel of expert guests - Corey Cruz (a market refrigeration tech), Matthew Taylor (head of refrigeration service at... by HVAC School - For Techs, By Techs
61 min listen
Q&A - How to Learn Superheat & Subcooling - Short #191: In this short podcast episode, Bryan answers an audience member's question and explains how to learn superheat & subcooling, two fundamental aspects of the HVAC/R trade. You can submit questions of your own at . Saturation is when a... by HVAC School - For Techs, By Techs
8 min listen
Focus of Your Goals w/ Refrigeration Mentor: In this episode of the HVAC School Podcast, Bryan Orr and Trevor Matthews delve into the importance of setting goals, focusing on them, and taking actionable steps to achieve them. They emphasize that goal-setting is crucial for personal and... by HVAC School - For Techs, By Techs
44 min listen
When to Switch to Emergency Heat? - Short #190: In this short podcast episode, Bryan talks about when to switch to emergency heat. He talks about coefficient of performance (COP) and how it's a deciding factor when to run emergency heat, which is when a system ONLY runs the backup heat; it doesn't... by HVAC School - For Techs, By Techs
8 min listen
Manual J in 15 Minutes?: Shelby Breger, co-founder of Conduit Tech, joins Bryan Orr on the HVAC School Podcast to discuss her company's innovative lidar-enabled design and sales software tool for HVAC contractors. Conduit Tech's software utilizes lidar sensors in iPads and... by HVAC School - For Techs, By Techs
39 min listen
Combustion Venting Categories - Short #189: In this short podcast episode, Bryan talks about the four different combustion venting categories for gas appliances as set by ASHRAE and where you'll see them. He also shares some notes about pressurization. These categories deal with the... by HVAC School - For Techs, By Techs
8 min listen
The Gift of Security and Learning w/ Jennifer Manzo: In this episode of the HVAC School Podcast, host Bryan Orr speaks with Jennifer Manzo, founder of HVA-Chicks Coalition. Jennifer shares her unique background as a longtime teacher and homeschooler who stumbled into the HVAC trade while researching... by HVAC School - For Techs, By Techs
36 min listen
Belt Talk - Short #188: In this short podcast episode, Bryan dives into some belt talk, including some bits about pulleys and sheaves. He also shares some belt tensioning tips for your next commercial HVAC job. Belts are less common than they used to be, but we find them in... by HVAC School - For Techs, By Techs
11 min listen
Using the Roomulator w/ Chris Hughes: In this episode of the HVAC School Podcast, host Bryan Orr speaks with Chris Hughes of The Energy Conservatory (TEC) about using the Roomulator card and DG-8 manometer for room pressurization testing. Chris provides background on how he came up with... by HVAC School - For Techs, By Techs
45 min listen
Primary & Secondary Air in Combustion - Short #187: In this short podcast, Bryan dives into a gas heating topic: primary & secondary air in combustion. Primary air is the air and oxygen content that enters the furnace BEFORE combustion. In older furnaces, prior to induced combustion, air was drawn... by HVAC School - For Techs, By Techs
7 min listen
Learning Outside the Box (Live Rebroadcast): This podcast episode is a live rebroadcast of a livestream with Craig Migliaccio (AC Service Tech) and Ty Branaman (love2hvac). It focuses on different types of learning and how to make the most out of learning experiences. The hosts discuss the... by HVAC School - For Techs, By Techs
61 min listen
Making Family Business Work w/ Leilani Orr: In this podcast episode, Bryan has an enjoyable conversation with his wife Leilani about navigating family relationships while building a business. They discuss the challenges and benefits of mixing family and work, setting boundaries, and maintaining... by HVAC School - For Techs, By Techs
35 min listen
Heat Pump Basics in Plain Language: In this solo podcast, Bryan provides an introduction to heat pumps, explaining the basics of how they work and key considerations in a way that is easy for anyone to understand. He starts by reviewing some core HVAC principles - that heat moves from... by HVAC School - For Techs, By Techs
27 min listen
Women in HVAC (Live Rebroadcast): This podcast brought together several women working in the HVAC industry to discuss their experiences and offer advice. The conversation focused on the positives of working in HVAC as a woman, the importance of community, and the resources available.... by HVAC School - For Techs, By Techs
53 min listen
History of AWG - Short #186 by HVAC School - For Techs, By Techs
9 min listen
A2L Update With Chemours Live from AHR: Don Gillis and Dr. Chuck Allgood from Chemours join the show to discuss their new easy as "1,2,3" branding around the A2L refrigerants R454A, R454B, and R454C. They explain that A2Ls are not actually flammable like hydrocarbons; they are just mildly... by HVAC School - For Techs, By Techs
34 min listen
What is DX? - Short #185: In this short podcast episode, Bryan tackles the following question: What is DX? In short, DX stands for "direct expansion," which means that you cool the end product via the refrigeration cycle. We blow air over an evaporator coil, which allows... by HVAC School - For Techs, By Techs
6 min listen
Safe Chemicals are Good Chemicals w/ Mike Pastorello: This podcast covers refrigeration technologies' growth and focus on providing safe, high-performing chemicals for HVAC technicians without hazardous ingredients. Mike Pastorello discusses the 2017 rebranding that gave their products a more modern,... by HVAC School - For Techs, By Techs
25 min listen
The VCRT Redesigned + More w/ Fieldpiece: In this podcast, Bryan chats with Tony Gonzalez of Fieldpiece about their latest innovations for service tools, including the redesigned VCRT, as well as the training resources they offer. They start off discussing Fieldpiece's philosophy of... by HVAC School - For Techs, By Techs
30 min listen
Vacuum and Recovery in an A2L World with Jesse Stewart: In this podcast, Bryan Orr interviews Jesse Stewart from NAVAC about A2L refrigerants and compatible tools and safety procedures. They discuss how NAVAC has a full line of A2L-compatible tools for evacuation and recovery, including the new NR7 and... by HVAC School - For Techs, By Techs
29 min listen
How Better Truck Stock Makes the Trade Better w/ Jim Fultz: This live podcast from AHR Expo 2024 discusses the costs of truck rolls for HVAC technicians and how technicians and companies can reduce those costs. Jim and Bryan highlight that every time a tech has to go to the supply house to get parts, the... by HVAC School - For Techs, By Techs
48 min listen

Discover this podcast and so much more

Measuring Voltage Drop w/ Jim Bergmann

Measuring Voltage Drop w/ Jim Bergmann

Description

Titles in the series (100)

More Episodes from HVAC School - For Techs, By Techs