25 min listen
RFT 098: No-Flap Visual Approach
FromReady For Takeoff - Turn Your Aviation Passion Into A Career
ratings:
Length:
7 minutes
Released:
Jun 30, 2017
Format:
Podcast episode
Description
A visual no-flap or partial-flap approach may be a required maneuver on a type rating test. there are several techniques to make this event easier. Naturally, good CRM requires you to use all of your resources, which include the ILS (if available), VASI/PAPI (if available) and non-ILS approaches in your database. If none of these are available, simply fly the airplane on a 3-degree glide path by positioning the aircraft 350 feet AGL at one mile, 650 feet AGL at two miles, and 1000 feet AGL at three miles. Another way to determine a 3-degree flight path is to descend at 1/2 your groundspeed times 10. A 140 knot groundspeed would require 700 feet-per-minute descent rate. This is based on groundspeed, which can be determined by true airspeed (TAS) adjusted for wind. If you cannot read groundspeed directly from your instruments, calculate your TAS by realizing that TAS increases approximately 2 percent above IAS for every 1000 feet of elevation.
Released:
Jun 30, 2017
Format:
Podcast episode
Titles in the series (100)
RFT 001: Getting An Airline Job: We give you an overview of the series and walk you through the process of becoming an airline pilot. Ready For Takeoff - Aviation and Commercial Airline Podcast - Your source for thoughts from the flight deck and beyond for Airplane Geeks looking for... by Ready For Takeoff - Turn Your Aviation Passion Into A Career