Simply Sewing

YOUR OVERLOCKER

HOW TO ADJUST THE DIFFERENTIAL FEED

■ If the sewn fabric is stretched, turn the dial counterclockwise (towards 2.2)

■ If the sewn fabric is gathered, turn the dial clockwise (towards 0.5).

PRESSURE ADJUSTMENT SCREW

This is used to adjust the presser foot tension. If

You’re reading a preview, subscribe to read more.

More from Simply Sewing

Simply Sewing5 min read
Tender Loving Care
You spent hours contemplating which fabric would be the absolute best pairing with your pattern. You took your measurements (again!) and carefully considered which size/s on your pattern to cut out. You might have even been especially good and spent
Simply Sewing9 min read
The Althea Blouse
■ Pattern sheets x4 (Tracing required)■ Instruction sheet Sizes 6–16 (150cm wide fabric only): ■ 1.5mx150cm Sizes 18–32 (150cm wide fabric only): ■ 1.6mx150cm Plus additional fabric for the sleeves: ■ Sleeve 1: 0.5m■ Sleeve 2: 0.9m■ Sleeve 3: 1.2m■ S
Simply Sewing9 min read
Sewing Space
Never lose your pins again with this gorgeous fabric flower-shaped pin cushion made from a mix of Seed Scatter, Rise Up and Sun Stretch, from the fabric range Bloom Together by Meenal Patel. There is always something so wholesome about a homemade sew

Related