Woodworker's Journal

At-a-Glance Storage and Better Grip Ideas

Rare-earth Magnet Bit Holders

I screwed these countersunk rare-earth magnets to the back of the cabinet door where I keep my cordless screwdriver. They hold my most often used screwdriver bits at the ready. The magnets have about a ⅛" projection, which makes grabbing the bits easy. If you adopt this trick for your shop, be sure to gently hand-drive the screws, since rare-earth magnets are brittle.

Bruce KiefferEdina, Minnesota

You’re reading a preview, subscribe to read more.

More from Woodworker's Journal

Woodworker's Journal3 min read
Handy Bit Maintenance Kit, Small Chisel Plane
Rockler’s Router Bit Maintenance Kit (item 68994; $34.99) provides an all-inone solution for cleaning and sharpening router bits up to 3¼" in diameter. The translucent reservoir on the base holds 10.5 oz of cleaning fluid, and it has windows so you c
Woodworker's Journal1 min read
Editor Picks: Router Bit Storage Inserts
Drilling holes in a board is one option for storing router bits by their shanks. But if the board shrinks across the grain, it can lock the bits in their holes, making them very difficult to remove. If it absorbs moisture, the shanks can rust. And it
Woodworker's Journal6 min read
Carving Linenfold Panels
Linenfold panels date from 14th century Europe and were used extensively in both cathedrals and secular architecture up through the end of the 1600s. In their day, they were called lignum undulatum, Latin for undulating wood; historians applied the n

Related Books & Audiobooks