The .223 Remington is one of my most used rifle cartridges, and I wanted to develop four loads for it that could be relied upon to do everything I need to do with that chambering. I wanted a load for varmints and small game, another for big game, one for tactical applications and one for precision on paper and steel. But—and here’s the kicker—I wanted to keep it as simple as possible by only using one powder and one primer, and I wanted to do it all with moderate to high velocity and sub-MOA precision.
I began the project by looking over my .223 Remington load notes that go back more than three decades. I also talked with other handloaders, and then I compared reloading data from various manuals. Here’s a look at what I ended up with, and I believe that these four, one-primer/one-powder loads, might very well