Model Airplane News

Flying Field Safety

While hobbies are meant to be fun, operating remote control aircraft carries its own unique set of safety challenges, similar to those of our full-scale brethren. Our flying fields are often located away from town (and emergency services), and there’s a whole host of hazards that we mostly manage to avoid. There are still plenty of things that can bite you when you least expect it, both literally and figuratively, so it pays to be prepared. Here are a few things to think about next time you’re out and about, especially if you’re at an event or visiting another club field that you’re not familiar with.

1 Familiarize Yourself

If you’re new to a location, take a few moments to get the lay

You’re reading a preview, subscribe to read more.

More from Model Airplane News

Model Airplane News2 min read
Pilot projects
SHOWCASING WHAT YOU BUILD & FLY | EMAIL ENTRIES TO: MAN_AIRAGE.COM Frank scratch built his rocket-powered glider model from 3mm and 6mm Depron foam. The model is designed using based on a 3-view drawing that he scaled up by hand. The 42-inch-long pla
Model Airplane News1 min read
Make A Laminated Hatch Cover
One way to improve a scale model’s appearance is to hide the RC hardware and switches. You can do this by making access hatches for often used items such as radio on/off switches, charging jacks, and fuel filler fittings. I am presently working on a
Model Airplane News2 min read
LOOKING BACK & LOOKING AHEAD
The first successful radio-controlled airplane is widely considered to be the Big Guff, built and flown by twin brothers Walter and Bill Good in 1937. It had a wingspan of eight feet, weighed eight and a half pounds, and was powered by a small gas en

Related Books & Audiobooks