Everand Logo

Welcome to Everand!

  • Stereophile

    MEASUREMENTS

    Jul 05, 2022 3 minutes

    I used DRA Labs’ MLSSA system, a calibrated DPA 4006 microphone, and an Earthworks microphone preamplifier to measure the Genelec G Three’s frequency response in the farfield. I used an Earthworks QTC-40 mike for the nearfield responses.

    Genelec specifies the G Three’s input impedance as 10k ohms. As this is an active loudspeaker, I calculated the input impedance by using spot frequency tones generated by my Audio Precision SYS2722 and examining how the nearfield sound pressure level dropped when I increased the source

    You’re reading a preview, subscribe to read more.

    More from Stereophile

    Stereophile14 min read
    Voxativ Ampeggio 2024
    Evaluating a loudspeaker that would become Stereophile’s 2011 Product of the Year, Art Dudley, at the time the magazine’s editor-at-large, wrote, “The Voxativ Ampeggio went beyond sounding good: More than once, with too many records to mention, I fou
    Stereophile10 min read
    German Heavy Metal
    I sometimes joke about how audio designers create products that resemble themselves, not just in how they look, but also in the design approach used, and especially the way they sound. So, we have tall, cool, pragmatic Scandinavians making gear like
    Stereophile3 min read
    Linn Klimax Solo 800 Monoblock Power Amplifier
    When I measured the Linn Klimax Solo 8001 for Jason Victor Serinus’s review in the May issue of Stereophile, I was very impressed by what I found. I concluded, “The Linn Klimax Solo 800’s measured performance is one of the best I have encountered, of

    Related