Mini Magazine

Upcycling at its finest

PROJECT PROFILE

THE OWNER

NAME: Nathan Bunting

AGE: 30

OCCUPATION: Fabricator, Welder

LOCATION: Wrexham, North Wales

THE CAR:

CAR: Mini City E

START CONDITION: Bare rusty shell

CONDITION NOW: Midway through

TIME TAKEN SO FAR: 2 years

ESTIMATED TIME OF COMPLETION: Late summer 2022

With some odd bits of steel, tin sheets and corrugated plastic - not forgetting your side of the garden fence - it’s surprising what can be achieved to create a makeshift garage, which is exactly what Nathan Bunting did. And with the garage built it was time to start work on reviving his Mini’s body shell. As it turned out, this wasn’t the easiest of tasks as he needed to replace the floor, rear tubs, battery box, the front end – pretty much everything other than the roof.

A few months later,

You’re reading a preview, subscribe to read more.

More from Mini Magazine

Mini Magazine2 min read
The Latest Mini Products
£153.60 For thirty years, Mini Spares has sold a stainless Morris grille based on the early version. However, in the mid-1960s a slightly different Morris grille was fitted which had a different lower slat arrangement. (Some of these now fetch £500 o
Mini Magazine3 min read
Game, Set, Hatch
Martyn Collins Contributor MINI LIFE My first car was a free 1977 Mini 1000, which needed a full restoration! One highlymodified Cooper replica later it was time for the real thing and a 1990 John Cooper ’S’ Converted Cooper RSP followed. Now fascina
Mini Magazine6 min read
Check, Please
let me tell you a story about this car. A few years back I was writing a feature for Octane magazine, twin-testing the Bristol Fighter and the Marcos TSO, and I took the R53 up to Henley where we were shooting the cars; the photographer asked if we c

Related