Everand Logo

Welcome to Everand!

  • Model Airplane News

    E-FLITE DRACO 2.0M

    May 03, 2022 5 minutes
    TEXT & PHOTOS BY ANDREW GRIFFITH

    An officially licensed replica of the world-famous bush plane, the E-flite DRACO 2.0m is constructed mostly of injection molded foam that is painted in the distinctive bright red of Mike Patey’s full-scale DRACO super bush plane. The DRACO is available in three versions: Plug-N-Play (PNP) that requires a transmitter, receiver, LiPo and charger; Bind-N-Fly (BNF) Basic with an AS3X/SAFE receiver that requires a transmitter, flight battery, and charger; and Ultimate Combo that comes with everything you need including a Spektrum NX8 DSMX transmitter and receiver, RealFlight Trainer Edition simulator, and a LiPo battery and charger.

    reviewed the BNF Basic version, and I was also provided with a Spektrum Smart 6S 5000mAh LiPo. The DRACO is spec’d to fly on a 4S through 6S battery pack and—depending on your flying style—you can

    You’re reading a preview, subscribe to read more.

    More from Model Airplane News

    Model Airplane News6 min read
    Keep It Legal
    As numerous uncrewed aircraft of all types are being rapidly produced, tested, and flown, the Federal Aviation Administration is working hard to get a handle on this with the introduction of various rules and regulations. These actions will have a di
    Model Airplane News5 min read
    Build From Foam Board
    Foam board is an affordable and easy to use product that can be employed to build a wide range of RC model aircraft. Let’s discuss a few techniques to get you started with building your first foam board RC airplane! You’ll first need to find a supply
    Model Airplane News1 min read
    Conquer the Sky!
    Model Airplane News covers the whole spectrum of RC and gives you the inspiration to advance your RC flying and building skills. We want to make sure you aren’t missing out on all the ways you can enjoy the content you are passionate about. Become a

    Related Books & Audiobooks