Everand Logo

Welcome to Everand!

  • MiniWorld

    Q&A

    Mar 04, 2022 4 minutes

    Ask Tim

    Email: mw.ed@kelsey.co.uk

    Post: MiniWorld Q&A, Kelsey Publishing Ltd, The Granary, Downs Court, Yalding Hill, Yalding, Kent, ME18 6AL, UK

    Tim Mundy has worked on Minis since the age of 13. In the 1990s he worked for Oselli Engineering and has been writing for MiniWorld for 25 years. He has owned more than 20 Minis and built two from scratch.

    New cam, new carb?

    I have just had a 1293cc engine, which is tuned with a modified head and fast road cam, installed in my Mini. Could you recommend a suitable carb set-up for this engine as the current carb is the original SU HS4 which, I think, is going to be too small. Whatever I get it

    You’re reading a preview, subscribe to read more.

    More from MiniWorld

    MiniWorld6 min read
    Project Perfection
    Over the years, MiniWorld has featured many Minis restored by Steve Burkinshaw, a world-renowned expert on coachbuilt Minis. His latest project, however, involves the restoration of a lightly modified 1275 Cooper S – and Steve, along with Mick Cleasb
    MiniWorld5 min read
    Q&A
    I bought a 1980 Mini as a restoration project last year and have completed all of the work to make it roadworthy. It is MoT exempt but I decided to take it in for a test as a check against the work I’ve done. Sadly, it failed due to corrosion in the
    MiniWorld3 min read
    Professional Finish
    The May issue of MiniWorld saw us looking at the stages of preparation and rectification of the Mini body, getting it to primer stage prior to the finishing colour and lacquer coats. This month, therefore, sees us move on… withthecar paint booth read

    Related Books & Audiobooks