Everand Logo

Welcome to Everand!

  • PassageMaker

    Stitch-and-Glue Process, Simplified

    Dec 14, 2021 2 minutes
    —Jonathan Cooper

    fter the design is roughed out between Devlin and his client, the CAD drawings are finished, and all parts are ordered for delivery to his shop. Marine-grade plywood is cut at a CNC router shop that Devlin trusts. Once the plywood,

    You’re reading a preview, subscribe to read more.

    More from PassageMaker

    PassageMaker3 min read
    Metal Magellan
    Arksen is a thoroughly modern boatbuilder, which is to say that it is not a boatbuilder at all. Instead, it’s a fulfillment agency that can address an adventurous boater’s needs from its London headquarters. It doesn’t matter whether the boater needs
    PassageMaker7 min read
    A Turn For The Better
    Recently, during a night passage between Hawaii and Guam, a boat’s steering failed. Moments later, the engine stopped. A quick check of the bilges proved there was no water coming in, so the crew shined spotlights off the stern. They saw the prop and
    PassageMaker2 min read
    Mjm 4
    Founded in 2002 by longtime J/Boats honcho Bob Johnstone, MJM Yachts built its brand on a line of handsome, capable vessels with all-weather pilothouses and accommodations for extended onboard time. A few years back, after two decades in Boston, the

    Related