Rack 'em up

STEPS

1. Sand the pieces of wood and the dowels. 2. Starting at 100mm from3. Drill a 25mm hole at each of the marks. Don’t drill all the way through! 4. Apply glue to one end of a dowel and into one of the holes. Insert the dowel into the hole. Repeat steps 3 – 5 for the rest of the dowels. 5. Seal the completed sections. 6. Position the two uprights about 750mm apart against a wall. Screw them to the wall (if wooden) or use wall anchors to attach them to a concrete/brick wall. 7. Store your tools in place!