Woodworker's Journal

STUMPERS Fiery Possibilities Or a toothy truth?

While Chris Ericson’s small cast-iron mystery tool from our August issue (pictured at right) has had him stumped, several of you have thrown your hats in the ring to help solve this riddle. Two likely possibilities have sifted to the top of the mail bag, based on your general consensuses.

After took on the task of researching “C D MFG CO” cast into agrees with the “press” aspect of Sim’s theory anyway, but in his opinion, it’s a book press instead.

You’re reading a preview, subscribe to read more.

More from Woodworker's Journal

Woodworker's Journal7 min read
From Our Readers
LESSONS LEARNED AT THE LATHE. One day last winter, I was feeling a sense of the doldrums that come from too much gray weather and not enough shop time. A woodworking cure that usually helps me snap out of my funk is to grab one of my dried bowl blank
Woodworker's Journal3 min read
Handy Bit Maintenance Kit, Small Chisel Plane
Rockler’s Router Bit Maintenance Kit (item 68994; $34.99) provides an all-inone solution for cleaning and sharpening router bits up to 3¼" in diameter. The translucent reservoir on the base holds 10.5 oz of cleaning fluid, and it has windows so you c
Woodworker's Journal1 min read
Editor Picks: Router Bit Storage Inserts
Drilling holes in a board is one option for storing router bits by their shanks. But if the board shrinks across the grain, it can lock the bits in their holes, making them very difficult to remove. If it absorbs moisture, the shanks can rust. And it

Related Books & Audiobooks