Building on a budget
Length of time: 1–2 hours Level of difficulty: Easy
01 CASE UNBOXING
So here we have it, our Phanteks Eclipse P300. What Phanteks has achieved here is impressive. We loved it back in 2018, and it’s still one of the better budget cases out there. For the low price you still get support for up to a 280mm AIO cooler in the front, a tempered-glass panel, full-size PSU cover, ample cable management, a fleck of RGB, and fairly good airflow too. It’s not perfect, but at this price, it kind of is.
Where does it fall down? Well some of the materials used on the inside are prone to fingerprints, it can be a bit tight to work in, and of course it only comes with a single 120mm fan as standard – but then again, it’s $99.
02 CHASSIS STRIPDOWN
This is a piece of advice we continually tout when it comes to building PCs, and with good reason, as it makes things so much easier. Strip down your case – the first thing you should always do is remove as much of the chassis as possible so you end up with a hollow skeleton. Not only does it mean you won’t damage the panels, but it’s also far easier to get your hands into all those tight nooks and crannies.
It’s also a good opportunity to shave weight and improve airflow by removing things such as
