Classic Motorcycle Mechanics

Labour of Luff!

Why restore a Honda CB200? Well, there are many sensible reasons that could have led me to this unpretentious little bike as a restoration target.

They are relatively plentiful for a bike of the 1970s so are cheap to buy. Parts are obtainable, they are fairly simple to work on and they offer fair performance for a tiddler, being able to maintain 70mph with a bit of coaxing.

The real reason I bought a knackered CB200 with 75,011 miles on the clock was caused by me stumbling across a poor-quality photo of a 17-year-old in outrageous flares, a vest and, for a reason that escapes me, carpet slippers, astride a gleaming brand new example. The photo was dated August 1977 and I had been the photographer rather than the pictured rider. Dave, (the friend in the photo) had opted for the sensible four-stroke CB200 and it was this model that was destined to be my first restoration, beginning back in 2014.

I first saw

You’re reading a preview, subscribe to read more.

More from Classic Motorcycle Mechanics

Classic Motorcycle Mechanics6 min read
Power Broker!
Last month I left off having had a pretty successful return to racing but with plenty of room for improvement. Suspension wasn’t where it needed to be and neither was ground clearance, both relatively easy to fix, and I had a few weeks to go at it be
Classic Motorcycle Mechanics2 min read
Scooperman!
Sometimes you just have to bite the bullet and get an expert in. Yes, it may very well stick in your craw to pay out for certain jobs when you know others can apparently do them DIY, at home, in the shed, etc. However, not all of us have the requisit
Classic Motorcycle Mechanics2 min read
Harris Performance leaves Hertford
Harris Performance, the manufacturer of sports motorcycles set up by Lester and Steve Harris and Steve Bayford in the early 1970s, is being more closely absorbed into Eicher Motors, the Indian owner of Royal Enfield. It means that the expertise in fr

Related