LABORATORY TEST REPORT
Jan 29, 2020
4 minutes
Steve Holding
Newport Test Labs measured the single-channel-driven power output of the Exposure 2010S2 D at 100-watts per channel at 1kHz into an 8Ω load, with measured power output dropping to 91-watts with a 20Hz test frequency and to 78-watts with a 20kHz test frequency. These output figures nearly doubled when the amplifier was driving a 4Ω load, with the Exposure 2010S2 D delivering 182-watts at 20Hz, 189-watts at 1kHz and 156-watts at 20kHz. These single-channel test results are indicative of the amplifier’s peak power output.
Tested using the Australian standard for measuring amplifier power output (that is, both channels driven into.
You’re reading a preview, subscribe to read more.
Start your free 30 days