Woodworker's Journal

FREE SHIPPING* for Woodworker’s Journal subscribers!

▪ Rockler Router Bit Center/Depth Gauge

Quickly set your router fence a precise distance from the center of the bit—ideal for dados and flutes. Also works as a height gauge for bits and blades. Notches measure from center of 1/4" and 1/2" shank router bits. Use the notchless portion to measure to the edge of the cutter, rather than the middle of the shank. 12" long steel ruler with metric and imperial measurements.

55010 …………………………… $ 19.99

FlexiPort Power Tool Hose Kit, 12' Hose

Flexible rubber ports connect the included fixed-length dust hose to a huge variety of handheld power tools, even those with odd port shapes! Ports swivel to avoid tangles, and are molded with an elbow to lift the hose off your work. Reverse thread for easy, airtight hose connections. 21/4" OD end connects to most shop vacuums or separators. FlexiPort diameters include ¾" ID x 11/4" OD, 1" ID, 11/4" ID and 11/2" ID.

51170 …………………………… $

You’re reading a preview, subscribe to read more.

More from Woodworker's Journal

Woodworker's Journal8 min read
Handheld Sanders
Everybody loves sanding! Oh, wait; I was thinking of ice cream. Sorry. Still, the analogy isn’t a bad one: If ice cream is the dessert that finishes up a good meal, sanding is the process that finishes — literally — all the combined efforts you put
Woodworker's Journal3 min read
Longleaf Pine
Until a few years ago, I thought longleaf pine was just a regional nickname for some sort of “real” pine — you know, like Norway or white pine. (For example, in the South, where longleaf hails from, a “coke” can be Mountain Dew, ginger ale or, heaven
Woodworker's Journal7 min read
From Our Readers
LESSONS LEARNED AT THE LATHE. One day last winter, I was feeling a sense of the doldrums that come from too much gray weather and not enough shop time. A woodworking cure that usually helps me snap out of my funk is to grab one of my dried bowl blank

Related