Everand Logo

Welcome to Everand!

  • Woodsmith

    READER’S Tips

    May 07, 2019 2 minutes

    Accessory Shelf

    I recently built the plywood shop projects from Woodsmith No. 234. They work great, but I found that I needed one more thing. And that was a smaller surface to mount my bench grinder. I took inspiration from the projects’ design and came up with the shelf shown here.

    As you can see in the photo above, the top of the

    You’re reading a preview, subscribe to read more.

    More from Woodsmith

    Woodsmith1 min read
    Hand-Cut Dovetails
    Dovetail joints have always been a favorite of mine. While there’s certainly more than a little know-how involved in routed dovetails, it’s the hand-cut kind that always grabbed my attention. I imagine it’s similar to why some people like to run for
    Woodsmith6 min read
    Measuring & Marking Tools
    A significant amount of time spent in the shop is used for marking and laying out workpieces that you’ll cut or drill with various tools. Here we’re going to take a peek at a few interesting tools for making those initial marks. A MINI CARPENTER SQUA
    Woodsmith7 min read
    Diamond Bookcase
    Sometimes saying a little says a lot. Only a slight deviation from the norm can massively change the look and function of an object. In this bookcase the primary deviation is obvious: the angled boxes. It’s likely the first detail someone will notice

    Related