Stereophile

MEASUREMENTS

I used DRA Labs’ MLSSA system and a calibrated DPA 4006 microphone to measure the Elac Carina BS243.4’s frequency response in the farfield, and an Earthworks QTC-40 mike for the nearfield responses. The measurements were taken without a grille.

Though Elac specifies the BS243.4’s sensitivity as 85dB/2.83V/m, my estimate was closer to 82.5dB(B)/2.83V/m. The impedance is specified as 6 ohms with a minimum value of 4.8 ohms. The solid trace

You’re reading a preview, subscribe to read more.

More from Stereophile

Stereophile4 min read
Letters
When my Stereophile reaches my doorstep, the first thing I turn to is Herb Reichert’s reviews. I don’t care what he’s reviewing; I love how he writes about it. In April’s edition, he shared his thoughts on an unexpected emotional response to Brice Ma
Stereophile9 min read
Silent Angel Bonn NX
With every passing season, a new audiophile-grade network switch hits the market. These products, which can cost hundreds or thousands of dollars, do the same basic thing as network switches bought at Best Buy for $30 or so (except, in some cases, sl
Stereophile13 min read
The Lina chronicles
I was at least 40' away when I spied my first dCS Lina stack at CanJam. It was black, sitting conspicuously on a table emitting a strong Space Odyssey Monolith vibe. I can’t remember which headphones I used, but I do remember how good it felt to face

Related