Scootering

ACCIDENT DAMAGE: WHAT TO LOOK OUT FOR AND THE ACTION TO TAKE

Coming off your scooter is not the nicest of things to happen, but from time to time it can happen. Even something simple like sliding off on diesel or grit in the road can do damage. Paint work may get scratched or a footboard dented, which are easy to notice. However, other damage can happen, which at first glance isn't so easy to spot or is hidden. These can have an impact at a later date, so even if you have had the slightest of accidents it is always best to fully inspect your scooter afterwards. For the benefit of this article we will be using the Lambretta, but the same principles apply to the Vespa or any other scooter for that matter.

Headset

The most fragile part of the Lambretta in an accident is the headset, primarily because it is made from aluminium. Even a small impact can cause the headset bottom to crack so that is the first place to inspect. Usually, this will occur between the light switch housing and the main body of the headset or on the opposite side from the gear control. Sometimes it will be a faint hairline crack so run your hands along to check, especially if the headset is painted in a dark colour as it

You’re reading a preview, subscribe to read more.

More from Scootering

Scootering2 min read
SCOOTERING Buyer’s guide
We’ve divided the market first by capacity, and then alphabetically within each category. We can’t possibly give values for every classic scooter, there are far too many variables for that, but we have included data for three of the most common machi
Scootering3 min read
Viva la Vespa Festival, Thailand 2024
During my time in Thailand I had the opportunity to visit some friends, Vespa enthusiasts and business partners, for example Lome from Vintage Vespa Thai/Auu Vespa and Kittisak from Lady Bug Scooter. Their warmth and hospitality are unrivalled and I
Scootering2 min read
The Fenwick Lambrettas That Was Then... French Production Deviations
A good example of the diversity in local design changes in French production is the horncasting, of which there were at least four different variants. This may seem illogical but was in fact forced on the company from the start of production, as ther

Related Books & Audiobooks