10 Projects for under $10

TOOL LIST FOR 10 FOR $10

Round Nose Pliers

Wire Cutters

Beading Needle

Scissors

1. RING OF LOVE BEADS

4 x 6mm Swarovski bi-cones – Rose

6 x 4mm Swarovski Pearls – Rose

MATERIALS

30cm x 18ga Artistic Wire – Silver

75cm x 28ga Artistic Wire – Silver

Rating

1. RING OF LOVE STEP ONE

Start with a 30cm piece of 18ga wire. Lightly mark the middle with a lead pencil. Starting from this point, wrap the wire twice around a cylindrical object the size you want the ring to be. From the middle point. See Diagram 1. measure 5cm outwards on each end of the wire and cut.

STEP TWO

Roughly wrap a 15cm piece of 28ga wire around the two circles of wire to hold them together correctly while you work on the decorative top of the ring. This wire will be removed later.

STEP THREE

Once again working with the two 5cm ends of the 18ga wire, place round nose pliers at the end of one of the pieces and turn a loop to start a spiral. Continue to spiral the wire around until it comes to the middle of the ring. See Diagram 2. Repeat with the other end.

STEP FOUR

Using a 60cm length of 28ga wire, wrap